Skip to content
Omnikalc

Parallelepiped volume calculator: volume and surface area from three edges and angles

Enter the three edges and the three angles between them to get the volume, the surface area, the base area and the height of a slanted box.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

°

Value out of range

°

Value out of range

°

Value out of range

Results

Volume

456.15 in³

Surface area
368.36 in²
Area of the base (a and b)
47.82 in²
Height above the base
9.539 in
Volume as a share of the rectangular box
95.03%

A slanted box, whose faces are parallelograms, is a parallelepiped, and its volume is not just the product of its edges. This parallelepiped volume calculator takes the three edges and the three angles between them at a corner to give the volume, the surface area, the base area, the height above the base and the volume as a share of the rectangular box.

How the calculation works

  • Volume = a × b × c × √(1 + 2 cos α cos β cos γ − cos²α − cos²β − cos²γ), where α, β and γ are the angles between the pairs of edges that meet at one corner. For right angles the square root is 1 and the formula gives a × b × c.
  • Surface area = 2 × (a × b × sin γ + b × c × sin α + a × c × sin β), the sum of the three pairs of parallelogram faces.
  • Base area = a × b × sin γ, and the height above the base is the volume ÷ the base area.
  • Share of the rectangular box = the square root factor, the fraction of the volume of an a × b × c box that the slanted solid keeps.

Example

A parallelepiped has edges 6, 8 and 10 in, with angles of 75° between b and c, 80° between a and c, and 85° between a and b. The cosines are 0.2588, 0.1736 and 0.0872, and the root factor is √(1 + 2 × 0.2588 × 0.1736 × 0.0872 − 0.0670 − 0.0301 − 0.0076) = √0.9030 = 0.9503. The volume is 6 × 8 × 10 × 0.9503 = 456.1 in³. The base area is 6 × 8 × sin 85° = 47.82 in², the height is 456.1 ÷ 47.82 = 9.54 in, and the surface area is 368.4 in².

Why it matters

The shape appears in crystallography, where the unit cell of a crystal is a parallelepiped, in vector calculus, where it gives the meaning of the triple product, and in construction, for slanted forms and sheared blocks. Knowing the volume is useful to estimate material, such as concrete, for a block that is not square.

Good to know

The edges and angles must describe a real solid, which means that the three angles are each below 180° and that their sum is below 360°. For values that do not form a solid, the volume shows as zero. The calculator does not include walls or hollow interiors, and the height is measured perpendicular to the base formed by edges a and b.

The volume calculator covers boxes, cylinders, cones and spheres, and the vector calculator gives the triple product from components.

Frequently asked questions

What is a parallelepiped?

A parallelepiped is a solid with six faces that are all parallelograms. Opposite faces are parallel and equal. A rectangular box is the special case where all the angles are right angles, and a cube is the case where in addition all the edges are equal.

Which angles do I enter?

Enter the three angles between the edges that meet at one corner. The angle α is between edges b and c, β between a and c, and γ between a and b. Each is between 0° and 180°, and the sum of any two must be larger than the third and the total smaller than 360°, or the solid cannot exist.

Why is the volume smaller than a × b × c?

A slanted box leans over, so it holds less than a rectangular box with the same edge lengths. The square root factor measures how much less. It is 1 for right angles and gets smaller as the angles move away from 90°.

How is this linked to the scalar triple product?

The volume equals the absolute value of the scalar triple product of the three edge vectors, a · (b × c). This calculator uses the lengths and the angles instead of the vector components, and the square root is the determinant of the table of dot products, taken to the power one half.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.