Skip to content
Omnikalc

Triangular distribution calculator: mean, spread and cumulative probability from a minimum, a mode and a maximum

Enter the minimum, the most likely value and the maximum to get the mean, the standard deviation, the median and the probability of staying below a value.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Results

Mean (a + b + c) ÷ 3

16.000

Standard deviation
2.944
Median
15.633
Probability that the value is at most x
54.29 %

When all you know is a range and a best guess, a triangle is a natural model. The triangular distribution calculator takes the minimum, the most likely value and the maximum, and gives the mean, the standard deviation, the median and the cumulative probability up to a value you choose.

How the calculation works

  • Enter the minimum a, the most likely value c (the mode) and the maximum b, with a ≤ c ≤ b. These three numbers define the triangle.
  • The mean is (a + b + c) ÷ 3, and the variance is (a² + b² + c² − ab − ac − bc) ÷ 18.
  • The median is a + √((b − a)(c − a) ÷ 2) when c is at least halfway between a and b, and b − √((b − a)(b − c) ÷ 2) otherwise.
  • Enter a value x to find the cumulative probability P(X ≤ x). It grows as a parabola up to c and then rises more slowly up to b.

Example

A task takes at least 10 days, most often 14 and at most 24 days. The mean is (10 + 14 + 24) ÷ 3 = 16.0 days, the variance is 156 ÷ 18 = 8.667, so the standard deviation is 2.944. The median is 24 − √(14 × 10 ÷ 2) = 15.63 days. The probability of finishing within 16 days is 1 − 8² ÷ (14 × 10) = 54.29 %.

Why it matters

Project planners, analysts and students use the triangular distribution for quick estimates and Monte Carlo simulation, because the three inputs are intuitive and the formulas are simple.

Good to know

The distribution has hard limits, so values outside the minimum and maximum have no chance, which may be too strong an assumption. The result depends heavily on the three guesses, and they should come from data or careful expert judgment.

The PERT estimate calculator weights the same three numbers differently, and the beta distribution calculator offers a smoother alternative.

Frequently asked questions

What is a triangular distribution?

It is a probability distribution described by three numbers: a minimum, a maximum and a most likely value. Its density has the shape of a triangle that peaks at the mode. It is a simple model when little data is available but experts can give these three estimates.

When should I use it?

It is common in project management, risk analysis and simulation, where people estimate an optimistic, a most likely and a pessimistic value. It is easier to set up than a normal or beta distribution but gives less weight to the center.

How does it differ from the PERT estimate?

The triangular distribution uses a simple average of the three numbers, while the PERT estimate gives the most likely value four times the weight. PERT therefore reduces the effect of extreme values, and it fits a smooth beta distribution.

Can the mode be at either end?

Yes. If the mode equals the minimum or the maximum, the triangle becomes a right triangle, and the distribution is skewed with its peak at the edge. The calculator handles these cases.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.