Skip to content
Omnikalc

What are the sine and cosine of an angle on the unit circle?

Enter an angle in degrees or radians: get its sine, cosine, tangent, the quadrant, the reference angle, the equivalent angle between 0° and 360° and its value in multiples of π.

Updated on
Your inputs

Value out of range

Results

Sine (y coordinate)

0.5000

Cosine (x coordinate)

-0.8660

Tangent
-0.5774
Tangent = sine ÷ cosine, the slope of the line from the origin to the point
Angle between 0° and 360°
150.00 °
Quadrant
2
Reference angle
30.00 °
Angle in multiples of π
0.8333 π rad

The unit circle is a circle of radius 1 centered at the origin of the coordinate plane. If you move around it counterclockwise by an angle θ starting from the positive x-axis, you arrive at the point (cos θ, sin θ). This one idea gives meaning to sine, cosine and tangent for every angle, including negative angles and angles larger than 360°. This calculator takes an angle in degrees or radians and returns its sine, cosine, tangent, quadrant and reference angle.

What the calculator returns

  • Cosine = the x coordinate of the point on the circle
  • Sine = the y coordinate of the point
  • Tangent = sine ÷ cosine, undefined where the cosine is zero (90° and 270°)
  • Angle between 0° and 360° = the equivalent angle after removing full turns
  • Quadrant = I (0° to 90°), II (90° to 180°), III (180° to 270°) or IV (270° to 360°)
  • Reference angle = the acute angle between the terminal side and the x-axis
  • Multiples of π = the angle in radians, divided by π

Example

Take 150°. It lies in quadrant II, with a reference angle of 30°. The sine is positive: 0.5. The cosine is negative: −0.8660. The tangent is −0.5774. In radians, 150° is 5π/6, or about 2.618 radians, which is 0.8333 of π.

Signs in each quadrant

In quadrant I, all functions are positive. In quadrant II, only the sine is positive. In quadrant III, only the tangent is positive, and in quadrant IV, only the cosine is positive. The reference angle gives you the size of the values, and the quadrant gives you the signs.

Values worth remembering

At 0°, the point is (1, 0); at 90°, (0, 1); at 180°, (−1, 0); at 270°, (0, −1). At 30°, 45° and 60°, the sines are 1/2, √2/2 and √3/2, and the cosines are the reverse. Every other angle can be found by using these values with the reference angle and the signs of the quadrant.

Common mistakes

Make sure the calculator is set to the right unit: sin(30) is 0.5 in degrees but about −0.988 in radians. Negative angles go clockwise, and angles larger than 360° wrap around, so 405° is the same as 45°. Remember that tangent has no value at 90° and 270°.

Frequently asked questions

What is the unit circle?

A circle of radius 1 centered at the origin; the point at an angle θ has coordinates (cos θ, sin θ).

How do you find the reference angle?

It is the acute angle between the terminal side and the x-axis.

What is the sine of 30°, 45° and 60°?

1/2, √2/2 and √3/2, or 0.5, 0.7071 and 0.8660.

How do you convert degrees to radians?

Multiply by π ÷ 180, so 180° is π radians.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.