Dog boots protect paws from road salt, hot pavement, ice, sharp rocks and long runs on rough trails. They only work if they fit: too loose and they twist or fall off, too tight and they rub. This calculator gives the boot width to choose and the number of sets a season of walking will use.
How the calculation works
- Boot width = front paw width + allowance
- Sets per season = miles per week × weeks ÷ miles a set lasts, rounded up
- Cost per season = sets × price of a set
- Cost per mile = cost per season ÷ miles walked
A dog with 2.5 in front paws needs boots about 2.75 in wide. Walking 10 miles a week in boots for a 16-week winter, with sets that last about 50 miles, it goes through 4 sets of 4 boots. At $40 a set, the season costs $160, or about $1.00 a mile.
How to measure
- Place the front paw on a sheet of paper while the dog stands with its weight on it, so the toes spread as they do when walking.
- Mark both sides of the paw, including the nails, and measure the width between the marks; measure the length too.
- Use the front paw, which is usually wider than the back one; some brands sell different sizes for front and back.
- Check the brand’s chart: sizes differ between brands.
Typical boot sizes
| Size | Paw width |
|---|---|
| XS | up to 1.75 in |
| S | 1.75 to 2.25 in |
| M | 2.25 to 2.75 in |
| L | 2.75 to 3.25 in |
| XL | 3.25 in or more |
Tips
- Let the dog get used to boots indoors first, a few minutes at a time, with treats.
- Fasten the strap snugly above the wrist pad, and check after each walk for rubbing or redness.
- Rinse and dry boots after salty walks.
- Without boots, wipe paws after walks on salted roads, and test pavement with your hand on hot days: if it is too hot for your palm, it is too hot for paws.