Skip to content
Omnikalc

How much electric fence tape and how many posts for a paddock?

Enter the paddock length and width, the number of strands and the post spacing: get the perimeter, the tape or wire to buy with 5% for ties and gates, the posts and the insulators.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

Value out of range

ft

Value out of range

Results

Tape or wire to buy

3,150 ft

Posts

84

Perimeter
1,000 ft
Insulators
252
Use wide tape or polyrope that horses can see, put the top strand at about wither height, drive at least three ground rods, and choose an energizer rated for the total length of live wire

Electric fencing is a popular way to fence horse paddocks: it is cheaper than board fencing, quick to move for rotational grazing and safe when it uses wide, visible tape. Planning the job means knowing the perimeter, how much tape or wire to buy, and how many posts and insulators to order. This calculator works it out for a rectangular paddock.

How the calculation works

  • Perimeter = 2 × (length + width)
  • Tape or wire = perimeter × strands × 1.05, to allow for ties, corners and gates
  • Posts = perimeter ÷ post spacing, rounded up
  • Insulators = posts × strands

A 300 × 200 ft paddock has a 1,000 ft perimeter. Three strands need about 3,150 ft of tape. With posts every 12 ft, you need about 84 posts and 252 insulators, plus heavier corner and gate posts.

Typical setups for horses

Element Usual choice
Strands 2 to 3 for horses, more with foals or ponies
Top strand height about wither height, 48 to 54 in
Bottom strand about 18 to 24 in above ground
Tape width 1 to 1.5 in, white or a bright color
Post spacing 10 to 15 ft for tape, wider for polyrope

The energizer and grounding

  • Choose an energizer rated for the total length of live wire, not just the perimeter, and for the vegetation that touches it.
  • Drive at least three ground rods, about 6 to 8 ft long and 10 ft apart, connected with insulated cable.
  • Check the voltage along the fence with a tester; horses respect a fence that delivers a sharp, steady pulse.

Safety

  • Never use barbed wire with electric fencing for horses.
  • Introduce horses to the fence in a small area first, so they learn it.
  • Keep corners rounded or well braced and gates clearly marked.
  • Signs are often required where an electric fence runs along a public path or road; check local rules.

Frequently asked questions

How much electric fence tape do I need?

About 3,150 ft for three strands around a 300 × 200 ft paddock, with 5% extra.

How many posts for an electric fence?

About 84 posts for a 1,000 ft perimeter with posts every 12 ft.

How high should electric fence be for horses?

Put the top strand at about wither height, 48 to 54 in.

How many ground rods does an electric fence need?

At least three, about 6 to 8 ft long and 10 ft apart.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.