Skip to content
Omnikalc

Home inspection cost calculator: what will a home inspection cost you?

Enter the price of the general inspection and the extras you want to see the total, its share of the home price and the cost per square foot.

Updated on
Your inputs
$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

sq ft

Value out of range

Results

Total inspection cost

$950

Cost of the extra inspections beyond the general one
$500
Cost as a share of the home price
0.24%
Cost per sq ft
$0.47

Before you buy a home, a home inspection gives you an independent view of its condition: roof, structure, plumbing, electrical system, heating and more. The inspector’s price is only the start, because a house may call for extra tests such as radon, termites or a sewer scope. This calculator adds them up and shows the total as a share of the price and per square foot.

How the calculation works

  • Add-ons = radon + termite + sewer scope + mold + pool, septic or well + re-inspection
  • Total cost = general inspection + add-ons
  • Share of the price = total ÷ home price × 100
  • Cost per square foot = total ÷ size of the home

Set an inspection you don’t need to zero to leave it out.

Example

A $450 general inspection, a $150 radon test, a $100 termite inspection and a $250 sewer scope total $950. For a $400,000 home of 2,000 sq ft, that is 0.24 % of the price, or $0.48 a square foot. The extra tests are $500 of the bill.

Why it matters

An inspection is a small fraction of the price and sometimes uncovers a defect worth many times its cost, such as a failing roof, a cracked sewer line or a termite infestation. Budgeting for it with the extras avoids surprises, and the report gives you leverage to ask for repairs or a lower price before closing.

Good to know

Inspectors look at what is visible and accessible: they do not open walls. Order the inspection early, because contracts set a deadline for it. Attend the inspection if you can, since the verbal explanation is often more useful than the written report. Ask about the inspector’s license, insurance and sample reports. This tool is for education.

The closing costs calculator budgets the other costs of a purchase, the mortgage escrow calculator adds taxes and insurance to a payment, and the moving cost calculator budgets the move.

Frequently asked questions

What does a home inspection cost?

A general inspection for a typical house costs about $300 to $600, more for large or old homes. Extra tests add to the bill: radon, termites, a camera in the sewer line, mold, and pool or septic checks, each often between $100 and $400.

Which extra inspections are worth it?

That depends on the location and the age of the home. Radon matters in many regions, termite inspections are often required by lenders in warm climates, and a sewer scope is worth it for older homes with mature trees, where roots and cracked pipes are common.

Who pays for the inspection?

The buyer normally pays for the inspection, and pays it when the inspection takes place, even if they walk away from the purchase. It is a small cost compared with a hidden defect worth thousands of dollars.

Can the inspection help me negotiate?

Yes. A report that lists defects gives you grounds to ask for repairs, a credit or a lower price, or to withdraw if the contract allows it. Ask the inspector to explain the serious findings, not just the list.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.