Skip to content
Omnikalc

Parking ratio calculator: how many parking spaces a building needs and what they cost

Enter the building area and the parking ratio of the zoning code to get the number of spaces required, the land area, the cost, and the gap with the spaces provided by a plan.

Updated on
Your inputs
sq ft

Value out of range

Value out of range

sq ft

Value out of range

$

Value out of range

Value out of range

Results

Spaces required

200

Spaces provided minus required
-20
The plan is short of spaces: a variance, shared parking or a bigger lot is needed
Parking ratio provided (per 1,000 sq ft)
3.60
Parking area needed
66,000 sq ft
Parking area as a share of the building area
132.0 %
Cost of the required parking
$1,200,000
Parking cost per sq ft of building
$24.00

Before a building can be approved, the code asks for a number of parking spaces. The parking ratio calculator converts the required ratio into the number of spaces, the land area and the cost, and compares the result with the spaces of the plan.

How the calculation works

  • Enter the gross building area and the required ratio of the zoning code, in spaces per 1,000 square feet (for example 4.0 for an office, 5 to 10 for a restaurant).
  • Enter the area of land per space, which includes the stall and its share of the aisles: 300 to 350 sq ft for a surface lot.
  • Enter the construction cost per space (about $5,000 to $8,000 for a surface lot, $25,000 or more for a garage) and the spaces provided by the plan.
  • The calculator gives the spaces required (rounded up), the gap with the plan, the area and cost of the parking and the cost per square foot of building.

Example

An office building of 50,000 sq ft must have 4.0 spaces per 1,000 sq ft: 200 spaces. The plan has 180, so it is 20 spaces short (a ratio of 3.60). At 330 sq ft per space, the parking needs 66,000 sq ft of land, 132 % of the building area. At $6,000 per space, it costs $1,200,000, or $24.00 per sq ft of building.

Why it matters

The calculator helps developers, architects, investors and planners to test the feasibility of a site, to see how much of a lot goes to parking and to compare the cost of surface parking and structured parking. It also helps to check an offer of a building with its parking.

Good to know

The ratio and the area per space are inputs that depend on the local code and on the layout of the lot. The calculator does not apply reductions, shared parking, accessible spaces or the rules for loading areas, and a real layout may need more or less land than the average. The costs are indicative. Check the zoning code and talk to the planning department.

The cap rate calculator values an income property, the commercial lease calculator covers the lease terms, the gross rent multiplier calculator compares properties, and the net effective rent calculator takes the concessions into account.

Frequently asked questions

What is a parking ratio?

The parking ratio is the number of parking spaces for each 1,000 square feet of building (or each 100 m²). Zoning codes set a minimum, often 3 to 4 for offices, 4 to 5 for medical offices, 1 to 2 per apartment, 4 to 10 for restaurants and 2 to 5 for retail. Developers and lenders also look at it, because tenants expect enough parking. Today many cities lower or remove the minimums.

How much land does a parking space take?

A standard stall is about 9 by 18 feet (162 sq ft), but with the aisles, the entrances and the landscaping the total is 300 to 350 sq ft per space in a surface lot. A two-way aisle needs 24 feet, and a stall at 90 degrees is the most efficient. A parking structure uses about 300 to 350 sq ft of floor per space on each level, so it saves land at a higher cost per space.

How much does parking cost?

A surface space costs about $3,000 to $8,000 depending on the region, the drainage and the paving. A space in a parking structure costs $20,000 to $35,000, and an underground space $40,000 to $70,000 or more. These costs are reasons for developers to ask for lower minimums, shared parking or a mix of uses with parking at different times of the day.

How can a project reduce the parking needed?

Shared parking between uses with different peaks (offices by day and restaurants by night), a location near transit, bike facilities, a travel plan for the employees, valet and tandem spaces, and off-site parking in a nearby lot can all lower the number of spaces. Many codes give a reduction or a variance if a study of the parking demand shows a lower need.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.