Absolute humidity is the mass of water vapor in each cubic meter of air. It differs from relative humidity, which only compares the vapor to what the air could hold at that temperature. This calculator turns a temperature and a relative humidity into the absolute humidity, the dew point, the mixing ratio and the amount of water in the air of your room.
How the calculation works
- Saturation vapor pressure (Magnus formula) = 6.112 × e^(17.62 T ÷ (243.12 + T)), with T in °C, in hPa
- Vapor pressure = relative humidity × saturation pressure
- Absolute humidity = 216.7 × vapor pressure ÷ (T + 273.15), in g/m³
- Mixing ratio = 622 × vapor pressure ÷ (air pressure − vapor pressure), in g/kg of dry air
- Dew point is the temperature at which the vapor pressure equals the saturation pressure
Example
Air at 72 °F (22.2 °C) and 50 % relative humidity at 1013 hPa has a vapor pressure of 13.4 hPa, so the absolute humidity is 9.8 g/m³. At saturation it would be 19.6 g/m³. The dew point is 52 °F, and the mixing ratio is 8.3 g/kg. In a room of 1,400 ft³ (39.6 m³), the air holds about 13.7 oz of water.
Why it matters
Relative humidity changes with temperature even when no water is added: heating cold air makes it feel dry. Absolute humidity does not, so it is the right number to compare indoor and outdoor air, size a dehumidifier or judge whether opening a window will help. It also explains condensation, because water drops out when a cold window or wall is cooler than the dew point.
Good to know
The formula is accurate to a fraction of a percent between about −40 and 50 °C. Air pressure matters little for absolute humidity but changes the mixing ratio. A comfortable indoor range is roughly 30 to 50 percent relative humidity. Real rooms exchange air with the outdoors, so the water in the air is small compared with what is in the walls, furniture and people. This tool is for education.
Related tools
The dew point calculator finds the condensation temperature, the dehumidifier size calculator picks a unit for a room, and the air density calculator accounts for moisture and pressure.