The humidity ratio is the mass of water vapor carried by each unit of dry air. The humidity ratio calculator gives the humidity ratio in grains per pound, in pounds per pound, the specific humidity, the vapor pressure and the saturation pressure from the temperature, the relative humidity and the pressure.
How the calculation works
- Enter the dry-bulb temperature of the air, its relative humidity and the total pressure (14.696 psia at sea level).
- The calculator finds the saturation pressure of water vapor at that temperature with the Magnus formula.
- It multiplies it by the relative humidity to get the partial pressure of the vapor, p_w.
- The humidity ratio is W = 0.62198 × p_w / (P − p_w), in pounds of water per pound of dry air, and it is shown in grains per pound (7,000 grains = 1 lb).
Example
Air at 75 °F (23.9 °C) with a relative humidity of 50 % at 14.696 psia. The saturation pressure is 0.429 psia, so the partial pressure of the vapor is 0.215 psia. The humidity ratio is 0.62198 × 0.2145 / (14.696 − 0.2145) = 0.00921 lb/lb, or 64.5 grains/lb. The specific humidity is 0.00921 / (1 + 0.00921) = 0.00913 lb/lb.
Why it matters
The calculator helps HVAC technicians, engineers, building scientists and students to size humidifiers and dehumidifiers, to read psychrometric charts without a chart and to check the moisture load of air. Because the humidity ratio is conserved in heating and cooling, it is the base for most air-conditioning calculations.
Good to know
The saturation pressure comes from the Magnus formula, which is accurate to about 0.1 % between 0 and 60 °C, and the calculation treats the air and the vapor as ideal gases. It does not include the small enhancement factor of moist air at high pressure. Use the actual barometric pressure at high altitude, since the humidity ratio for a given vapor pressure is higher when the pressure is lower.
Related tools
The dew point calculator gives the temperature at which the water condenses, the absolute humidity calculator gives the mass of water per volume of air, the moist air enthalpy calculator gives the heat content of the air, and the wet-bulb temperature calculator handles evaporative cooling.