Skip to content
Omnikalc

Band gap to wavelength calculator: which light does a semiconductor absorb or emit?

Choose a semiconductor or enter a band gap to get the wavelength of the absorption edge, the frequency and the spectral region, for solar cells, LEDs and photodetectors.

Updated on
Your inputs
eV

Value out of range

Results

Absorption edge wavelength

873.1 nm

Infrared: the material absorbs all visible light
Band gap used
1.42 eV
Frequency at the edge
343.4 THz
Photon energy at the edge per mole
137.0 kJ/mol

The color of light that a semiconductor absorbs or emits is set by its band gap. The band gap to wavelength calculator gives the absorption edge wavelength for ten common semiconductors or for a custom gap. It also gives the frequency, the energy per mole of photons and the region of the spectrum.

How the calculation works

  • Choose a semiconductor from the list, or choose custom and enter a band gap in electron volts.
  • A photon can lift an electron across the gap only if its energy is at least equal to the band gap Eg.
  • The absorption edge (cut-off) wavelength is λ = h c / Eg ≈ 1,239.84 / Eg in nm, with Eg in eV.
  • The result also gives the frequency, the region of the spectrum (ultraviolet, visible or infrared) and the energy per mole of photons.

Example

Gallium arsenide has a band gap of 1.42 eV. Its absorption edge is at 1,239.84 / 1.42 = 873 nm, in the near infrared, and the frequency at the edge is 343 THz. Photons with a shorter wavelength are absorbed, and GaAs makes infrared LEDs and lasers and high-efficiency solar cells.

Why it matters

The band gap decides which part of sunlight a solar cell uses, which photodetector works at a given wavelength, which infrared window a material is transparent to and what color an LED or a laser diode gives. A simple conversion from eV to nm is the first step in choosing a material.

Good to know

The values are band gaps at 300 K of the pure materials, and they fall with temperature and change with doping, strain, alloy composition and nanostructure size. The edge wavelength is a cut-off, and the real absorption and emission peak lie a little away from it (the emission is at slightly longer wavelength). Direct and indirect gaps behave very differently for light emission, which this calculator does not show.

The photon energy calculator converts between energy, frequency and wavelength, the Shockley diode calculator covers the current of a junction, the photoelectric effect calculator covers the removal of electrons by light, and the wavelength calculator covers the link between frequency and wavelength.

Frequently asked questions

What is the band gap?

In a semiconductor or insulator, it is the energy difference between the top of the valence band, full of electrons, and the bottom of the conduction band, which is empty. An electron needs at least this energy to be freed and to conduct. The gap sets the color of the light that the material absorbs and, in an LED or laser, emits.

How is the wavelength related to the gap?

A photon of energy E has a wavelength λ = h c / E, which is λ (nm) = 1,239.84 / E (eV). Silicon (1.12 eV) has an edge at 1,107 nm, so it absorbs visible and near infrared light, and is transparent to longer wavelengths, which is why it is used for solar cells and for infrared optics.

How does it decide the color of an LED?

In an LED, an electron falls across the gap and emits a photon of about the gap energy. Gallium arsenide (infrared), gallium phosphide (green), and gallium nitride alloys with indium (blue and violet) cover the spectrum. The wide gap of 3.4 eV of GaN gives an edge at 365 nm in the near ultraviolet, and the blue LED uses InGaN with a smaller gap.

Does the band gap change with temperature?

Yes. The gap of most semiconductors falls as the temperature rises, by about 0.3 to 0.5 meV per kelvin for silicon (Varshni’s law). The values here are at 300 K. In a direct-gap material such as GaAs, light is emitted efficiently, but in an indirect-gap material such as silicon or germanium it is not, which is why Si LEDs are poor.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.