A change of temperature in a cup of solution measures the heat of a reaction. The calorimetry calculator turns the mass of solution, its specific heat, the temperatures and the calorimeter constant into the heat released or absorbed and into the enthalpy change per mole, ΔH, of the limiting reactant.
How the calculation works
- Enter the mass of the solution in the calorimeter and its specific heat (4.184 J/g·°C for a dilute aqueous solution).
- Enter the initial and final temperatures, the calorimeter constant (the heat capacity of the cup and the thermometer) and the moles of limiting reactant.
- The heat absorbed by the surroundings is q = m c ΔT + C_cal ΔT. The reaction releases this heat: q_rxn = −q.
- The enthalpy change per mole is ΔH = −q / n. A negative value is an exothermic reaction, a positive one an endothermic reaction.
Example
In a coffee-cup calorimeter, 50 mL of 1.0 M HCl and 50 mL of 1.0 M NaOH (100 g of solution) warm from 22.0 °C to 28.8 °C. The solution absorbs 100 × 4.184 × 6.8 = 2,845.1 J and the calorimeter (15 J/°C) 102.0 J. The reaction releases 2,947.1 J for 0.050 mol, so ΔH = −58.94 kJ/mol, close to the accepted value of −57 kJ/mol for the neutralization.
Why it matters
Calorimetry is a standard laboratory experiment in general chemistry, and the basis of thermochemistry: enthalpies of neutralization, of dissolution and of combustion are all measured this way. The calculator lets you check the arithmetic and the sign of a lab report.
Good to know
The calculator assumes that the reaction takes place at constant pressure in an insulated container with no heat loss to the surroundings, that the solution has a constant specific heat, and that the mass of the solution is the total of the masses that were mixed. Real calorimeters lose heat during the measurement, and a more careful experiment extrapolates the temperature curve back to the time of mixing. The heat of dilution and of any phase change is not separated from the reaction.
Related tools
The specific heat calculator gives the heat needed to warm a substance, the bond enthalpy calculator estimates the enthalpy from bond energies, the Gibbs free energy calculator links enthalpy, entropy and spontaneity, and the titration calculator covers acid–base neutralization.