Skip to content
Omnikalc

CFU calculator: how many colony forming units per mL are in your sample?

Enter the colonies counted, the number of plates, the volume plated and the dilution to get CFU per mL, its log10 value and the total CFU in your sample.

Updated on
Your inputs

Value out of range

Value out of range

mL

Value out of range

Value out of range

mL

Value out of range

Results

Concentration (CFU per mL of original sample)

1,420,000,000

Log10 of CFU per mL
9.152
Average colonies per plate
142.0
Within the countable range of 30 to 300 colonies per plate
Total CFU in the original sample
14,200,000,000

Counting colonies on an agar plate gives a number of cells that grew, but the result must be scaled back to the original sample. The CFU calculator takes the colonies counted, the number of plates, the volume plated and the dilution, and gives the CFU per mL, its log10 value, the average colonies per plate and the total CFU in the sample.

How the calculation works

  • Count the colonies on each plate that has between 30 and 300 colonies, and enter the total and the number of plates.
  • Enter the volume plated on each plate and the dilution as a power of ten. A dilution of 10⁻⁶ is entered as 6.
  • CFU per mL = average colonies per plate × 10^x ÷ volume plated. The calculator also gives the log10 value and the total CFU in the original sample volume.
  • Plates outside the 30 to 300 range are less reliable. Fewer than 30 colonies give a high statistical error, and more than 300 crowd each other and merge.

Example

Two plates of the 10⁻⁶ dilution, each with 0.1 mL plated, show 284 colonies in total, or 142 per plate. The concentration is 142 × 10⁶ ÷ 0.1 = 1.42 × 10⁹ CFU/mL, which is a log10 value of 9.152. A 10 mL sample therefore holds 1.42 × 10¹⁰ CFU.

Why it matters

Microbiology courses, food safety labs, water testing and brewing all rely on plate counts. Doing the dilution arithmetic by hand invites errors, especially when the dilution is expressed as an exponent.

Good to know

The count is only as reliable as the plating technique, the medium and the incubation time. Use plates in the countable range, count in duplicate or triplicate and report the dilution you used. Spreaders or merged colonies can bias the count.

The serial dilution calculator plans the dilution steps, and the log reduction calculator measures how much a treatment lowered the count.

Frequently asked questions

What does CFU mean?

CFU stands for colony forming unit. It is one viable cell, or a cluster of cells, that grows into a visible colony on an agar plate. Counting colonies is the classical way to estimate how many live microorganisms a sample contains.

Why count only plates with 30 to 300 colonies?

Below 30 colonies the random variation in the count is too large, because the error of a count of N is about the square root of N. Above 300 colonies, neighbors overlap and some cannot be seen. That range is the widely used convention, although some methods use 25 to 250.

Why do CFU differ from the real number of cells?

A single colony may come from a chain or a clump of cells, and dead cells or cells that cannot grow on the medium do not form colonies. CFU measure viable, culturable cells, not all cells.

How do I choose the dilution to plate?

Plate several tenfold dilutions and keep the one that gives a countable number. If you expect about 10⁹ cells per mL, a plate of 0.1 mL at the 10⁻⁶ dilution should show roughly 100 colonies.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.