Skip to content
Omnikalc

Chvorinov's rule calculator: how long does a casting take to freeze, and how big must the riser be?

Enter the size of the casting and the mold constant to get the solidification time and the size of a riser that freezes last.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

min/in²

Value out of range

Value out of range

Results

Solidification time of the casting

1.13 min

Casting modulus V/A
0.750 in
Riser diameter (height = 1.5 × diameter)
4.20 in
Riser height
6.30 in
Solidification time of the riser
1.62 min

When metal is poured into a mold, the thick parts freeze last and may leave holes if no liquid feeds them. The Chvorinov’s rule calculator takes the dimensions of a plate or block casting, the mold constant and the riser modulus factor, and gives the solidification time, the casting modulus, the riser diameter, the riser height and the solidification time of the riser.

How the calculation works

  • Enter the length, width and thickness of a plate or block casting, and the mold constant B of the mold and metal.
  • The calculator finds the volume V and the cooling surface area A of the casting, and its modulus M = V/A.
  • Chvorinov’s rule gives the solidification time t = B × (V/A)².
  • Enter how much larger the riser modulus should be, usually 1.2, so that the riser freezes last. The calculator sizes a cylindrical riser with a height of 1.5 diameters.

Example

A plate casting of 12 × 12 × 2 in has a volume of 288 in³ and a surface area of 384 in², so its modulus is 0.750 in. With B = 2.0 min/in², it solidifies in 2.0 × 0.75² = 1.13 min. A riser must have a modulus of 1.2 × 0.75 = 0.90 in. A cylinder with a height of 1.5 diameters has a modulus of 0.2143 D, so D = 4.20 in and H = 6.30 in, and the riser solidifies in 1.62 min, after the casting.

Why it matters

Foundry engineers use Chvorinov’s rule to predict which section of a casting freezes last, to place risers and chills, and to estimate how long to wait before shaking out. The calculation shows how thickness matters much more than the volume, since the time grows with the square of the modulus.

Good to know

The rule gives a good estimate for simple shapes in sand molds and loses accuracy for complex shapes, thin sections, chilled molds and different metals. The mold constant must come from your own metal and mold. The riser rule here covers only the freezing time and not the feeding volume or the neck. Treat the result as a design aid.

The metal weight calculator finds the mass of a casting, the latent heat calculator covers the heat released in freezing, the heat conduction calculator covers heat flow through the mold, and the scrap metal value calculator prices metal.

Frequently asked questions

What is Chvorinov's rule?

It says that the time for a casting to solidify is proportional to the square of its volume-to-surface-area ratio: t = B (V/A)². The ratio V/A is called the modulus. A thick, compact shape has a large modulus and takes a long time, while a thin plate with a lot of surface area freezes fast. The rule was proposed by Nicolas Chvorinov in 1940.

What is the mold constant?

It is a factor that depends on the metal, the mold material, the pouring temperature and the heat properties of the mold. For aluminium in a sand mold, it is about 2 min/in², or 0.31 min/cm². Find it from a trial casting, or from a reference for your alloy and mold. The result is proportional to it, so the uncertainty carries through.

Why do castings need a riser?

Metal shrinks as it solidifies, and a riser is a reservoir of liquid that feeds the casting until it has frozen. The riser must freeze after the casting, or it will not be able to feed it. The usual rule is a riser modulus of 1.2 times that of the casting, which gives a time about 1.44 times longer.

How is the riser size found?

A cylindrical riser of height 1.5 times its diameter, cooling from its side and top, has V/A = 0.2143 D. Setting this equal to the required modulus gives the diameter. Other shapes, such as taller or insulated risers, have other moduli. The size also has to supply enough metal for the shrinkage, which is a second check.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.