Skip to content
Omnikalc

Crude protein calculator: convert nitrogen into protein

Enter the nitrogen content from a Kjeldahl test, pick the conversion factor and add the moisture to get crude protein as fed and on a dry matter basis.

Updated on
Your inputs
%

Value out of range

%

Value out of range

Results

Crude protein (as fed)

15.00%

Crude protein on a dry matter basis

17.05%

Dry matter
88.0%
Protein per pound of feed
68.0 g

Labs rarely measure protein directly. They measure nitrogen, usually by the Kjeldahl method, and convert it. This crude protein calculator takes the nitrogen percentage, a conversion factor and the moisture to give the crude protein as fed, the dry matter and the crude protein on a dry matter basis.

How the calculation works

  • Crude protein = nitrogen % × conversion factor. Proteins contain about 16 % nitrogen, so the usual factor is 100 ÷ 16 = 6.25.
  • Other factors are used for milk (6.38), wheat (5.70) and peanuts (5.46), whose proteins contain a different share of nitrogen.
  • Dry matter = 100 − moisture %.
  • Crude protein on a dry matter basis = crude protein as fed ÷ dry matter × 100, which allows comparing feeds of different water content.

Example

A feed sample contains 2.4 % nitrogen and 12 % moisture. The crude protein is 2.4 × 6.25 = 15.0 % as fed. The dry matter is 88 %, so the crude protein on a dry matter basis is 15 ÷ 88 × 100 = 17.05 %. A pound of this feed carries about 68 g of crude protein.

Why it matters

Crude protein is the number printed on every bag of animal feed and one of the standard figures in food composition. Farmers use it to balance rations, millers use it to grade wheat and food labs use it to check labels. The dry matter basis is the one used to compare hays, silages and concentrates.

Good to know

The factor 6.25 is a convention. For wheat flour 5.70 is more accurate, and using 6.25 overstates the protein by about 10 %. Nitrogen from non-protein sources is counted, so the result is called crude. Pet food and feed labels list a minimum crude protein, which is as fed. When comparing feeds with different moisture, convert to a dry matter basis first. The Dumas combustion method gives nitrogen results that are slightly higher than Kjeldahl for some samples.

The protein calculator estimates how much protein a person needs, the grams to moles calculator converts nitrogen to moles and the dilution calculator prepares reagent solutions.

Frequently asked questions

What is crude protein?

It is the protein content estimated from the nitrogen content of a food or feed. Since protein is the main source of nitrogen, the nitrogen is multiplied by a factor to give protein.

Why 6.25?

Average protein contains 16 % nitrogen, and 100 ÷ 16 = 6.25. The factor is an approximation, and for some foods such as milk or wheat a different factor is more accurate.

Why is it called crude?

Because the method measures all the nitrogen, including that of non-protein compounds such as urea, nucleic acids and melamine. That is why a protein result can be inflated by an additive.

Why use dry matter basis?

A wet feed with 10 % protein may carry more protein than a dry hay with 12 % once the water is removed. The dry matter basis puts them on the same scale.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.