Skip to content
Omnikalc

How far does an electric charge reach in salt water?

Enter the ionic strength, the temperature and the permittivity of the solvent: get the Debye length, the inverse Debye length, the Bjerrum length and the double layer thickness.

Updated on
Your inputs

Value out of range

°C

Value out of range

Value out of range

Results

Debye length

0.785 nm

Under 1 nm: charges are screened within a few molecular diameters
Debye length in angstroms
7.85 Å
Inverse Debye length κ
1.274 nm⁻¹
Bjerrum length
0.715 nm
Double layer thickness (about 3 Debye lengths)
2.35 nm

Put a charged particle in salty water and the ions around it rearrange to cancel its electric field. At a distance of a few nanometres, the particle is hardly felt. The Debye length is the scale of that screening. It matters in electrochemistry, colloid science, biology and semiconductors. This calculator gives the Debye length of an electrolyte solution from its ionic strength, its temperature and the permittivity of the solvent, and it also gives the Bjerrum length.

How the calculation works

  • Debye length λD = √(ε₀ × εr × kB × T ÷ (2 × NA × e² × I))
  • Bjerrum length = e² ÷ (4π × ε₀ × εr × kB × T)
  • I is the ionic strength in mol/m³ (1 mol/L = 1,000 mol/m³)
  • The double layer thickness is commonly taken as about 3 Debye lengths

Example

Physiological saline has an ionic strength of about 150 mM. At 25 °C in water (permittivity 78.4), the Debye length is 0.785 nm and the Bjerrum length is 0.715 nm. Diluting the salt to 1 mM at 20 °C stretches the Debye length to 9.64 nm, about twelve times longer.

Why it matters

The Debye length controls how stable a colloid or a paint is, how strongly proteins stick to each other or to surfaces, and how the ion channels in a nerve membrane work. In biosensors, charged analytes can be detected by field-effect devices only when they lie within a Debye length of the surface, which is why many sensors work in diluted buffers.

Good to know

The formula applies to dilute solutions where ions are point charges and interactions are weak. At concentrations above about 0.5 M, real solutions deviate, and the Debye length stops decreasing as fast as the theory predicts. A multivalent salt contributes through the ionic strength, which weights each ion’s concentration by the square of its charge.

The molarity calculator converts between mass and concentration, the pH calculator describes the acidity of the solution, and the Coulomb’s law calculator gives the electrostatic force between two charges.

Frequently asked questions

What is the Debye length?

The distance over which the electric field of a charge is screened by the mobile ions in a solution. Beyond a few Debye lengths, the charge is almost invisible. It shrinks as the ionic strength grows.

What is the formula?

λD = √(ε₀ × εr × kB × T ÷ (2 × NA × e² × I)), where I is the ionic strength in mol/m³. At 25 °C in water, a handy form is λD ≈ 0.304 nm ÷ √I with I in mol/L.

What is the Bjerrum length?

The distance at which the electrostatic energy of two elementary charges equals the thermal energy kB × T. In water at 25 °C it is about 0.71 nm.

Why does physiological saline screen so strongly?

At 150 mM the Debye length is only about 0.8 nm, less than the size of a protein. Charges in blood and in cells therefore interact only at very short range, which has consequences for protein binding, DNA and drug design.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.