Skip to content
Omnikalc

Monin–Obukhov length calculator

Enter the friction velocity, the air temperature, the sensible heat flux and the measurement height to get the Obukhov length, the stability parameter z/L and the stability class.

Updated on
Your inputs
ft/s

Value out of range

°F

Value out of range

W/m²

Value out of range

ft

Value out of range

Results

Obukhov length L

-123 ft

Stability parameter z/L

-0.269

Stability class (0 very unstable, 1 unstable, 2 neutral, 3 stable, 4 very stable)

1

Kinematic heat flux w′θ′
0.1244 K·m/s
Temperature scale θ* = −w′θ′ / u*
-0.314 K

The Monin–Obukhov length calculator gives the Obukhov length, the stability parameter z/L, a stability class, the kinematic heat flux and the temperature scale of the surface layer, from the friction velocity, the air temperature, the sensible heat flux and the measurement height.

How the calculation works

  • Enter the friction velocity u* and the air temperature.
  • Enter the sensible heat flux, positive when the surface heats the air, negative at night.
  • Enter the measurement height to get the stability parameter z/L.

Example

With a friction velocity of 1.3 ft/s, an air temperature of 68 °F and a heat flux of 150 W/m², the kinematic flux is 0.1244 K·m/s and the Obukhov length is -123 ft. At a height of 33 ft, z/L is -0.269, so the stability class is 1. The temperature scale is -0.314 K.

Why it matters

The calculator helps atmospheric science and environmental engineering students, wind energy analysts, micrometeorologists and air quality modelers who need the stability of the surface layer to correct wind profiles, to estimate turbulent fluxes or to select a dispersion stability class.

Good to know

Use the friction velocity and the sensible heat flux measured by sonic anemometers or estimated from profile data over the same averaging period, typically 30 minutes. The calculation assumes an air density of 1.2 kilograms per cubic meter and a specific heat of 1005 joules per kilogram per kelvin, and it ignores the effect of humidity on buoyancy. A flux of exactly zero is replaced by a tiny value to avoid an infinite length. The similarity theory applies over flat, homogeneous terrain, in the surface layer, below about 10 percent of the boundary layer depth.

The Rossby number calculator compares inertia and rotation, the Ekman layer calculator describes the wind turning with height, the wind shear power law calculator extrapolates the wind speed and the Brunt–Väisälä frequency calculator measures the stability of a layer.

Frequently asked questions

What is the Monin–Obukhov length?

The Obukhov length L is the height above the ground at which the production of turbulence by wind shear equals the production or destruction of turbulence by buoyancy. It is the scale of the surface layer in Monin–Obukhov similarity theory. A small |L| means that buoyancy dominates, and a large |L| means that shear dominates and the layer is nearly neutral.

How is it calculated?

The formula is L = −u*³ T / (κ g w′θ′), where u* is the friction velocity, T the absolute temperature, κ = 0.4 the von Kármán constant, g the gravity and w′θ′ the kinematic sensible heat flux, which is the heat flux divided by the air density and the specific heat. It is negative when the surface heats the air and positive when the air is cooled from below.

What does the sign of L tell?

A negative L means an unstable surface layer, as on a sunny day with a heated surface, where convection mixes the air vigorously. A positive L means a stable layer, as on a clear night with a cooled surface, with weak mixing. Values of |L| larger than a few hundred meters are close to neutral conditions.

What is z/L used for?

The ratio of the measurement height to L is the stability parameter in the similarity functions that correct the logarithmic wind profile. It is used to adjust the wind speed from one height to another, to estimate fluxes from the profiles, and in dispersion models to classify the stability for the spread of pollution.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.