Skip to content
Omnikalc

Display luminance and ambient contrast calculator

Enter the ambient illuminance, the screen reflectance and the display white and black levels to get the effective contrast and the brightness needed.

Updated on
Your inputs
lux

Value out of range

%

Value out of range

cd/m²

Value out of range

cd/m²

Value out of range

%

Value out of range

Results

Effective contrast ratio in this light

4.9 : 1

Luminance of the diffuse surface
1,592 cd/m²
Luminance reflected by the screen
127.3 cd/m²
Native contrast ratio
1,000 : 1
White luminance for a 3:1 contrast
256 cd/m²
Surface luminance in foot-lamberts
465 fL

The display luminance and ambient contrast calculator gives the luminance of a diffuse surface, the luminance reflected by a screen, the native and effective contrast ratio and the white level needed for a readable display.

How the calculation works

  • Enter the ambient illuminance in lux and the reflectance of a diffuse surface.
  • Enter the white and black luminance of the display and the reflectance of the screen.
  • The calculator gives the reflected luminance ρ × E / π, then the contrast with that reflection added to the white and the black.

Example

In 10000 lux, a diffuse surface of 50 % reflectance has a luminance of 1,592 cd/m², or 465 fL. A screen with 4 % reflectance mirrors 127.3 cd/m². Its native contrast of 1,000 : 1 drops to 4.9 : 1 in this light. For a readable 3 : 1 the white level must reach 256 cd/m².

Why it matters

The calculator helps product designers, photographers, event and signage planners, and anyone choosing a monitor, a phone, a car display or a projector screen who wants to know how bright it must be for the room or the daylight.

Good to know

The model treats the reflection as diffuse and the screen as a flat surface. A glossy screen also shows specular reflections of windows and lamps, which are far brighter than the diffuse value, so the position of the screen relative to the light matters more than the figure. Matte and anti-glare coatings scatter the light and lower the contrast of dark detail a little, but they avoid hard reflections. For HDR video and photo editing, control the room light to under 100 lux. For outdoor use choose a display with a high peak brightness, a good anti-reflection layer and an optical bonding of the glass, and test it in the real light before buying.

The lumens calculator relates the light flux to the illuminance, the color contrast calculator checks text against its background, the daily light integral calculator handles plant lighting and the room lighting lumen method calculator sizes the lamps of a room.

Frequently asked questions

What is luminance?

Luminance is the light that leaves a surface in a given direction per unit area, measured in candelas per square metre (cd/m²), also called nits. It is what the eye sees as brightness. For a perfectly diffuse surface lit by an illuminance E and with a reflectance ρ, the luminance is L = ρ × E / π.

Why does a screen lose contrast in daylight?

The glass of a screen reflects part of the ambient light, about 4 % for an untreated glass surface, and this reflection adds the same luminance to white and to black. The effective contrast is (Lwhite + Lreflected) / (Lblack + Lreflected). Because the black level is very low, the reflection dominates it, and a contrast ratio of 1 000 : 1 in the dark falls to 5 : 1 in the shade.

How bright must a display be outdoors?

To keep a contrast of 3 : 1, a commonly used minimum for legibility, the white luminance must be at least 3 × (Lblack + Lreflected) − Lreflected. In bright shade of 10 000 lux this is about 250 cd/m², and in direct sun of 100 000 lux it is more than 2 000 cd/m². Anti-reflective coatings and a matte surface lower the reflectance and help.

How is the illuminance measured?

Measure it with a lux meter held at the screen, facing the source. Typical values are 300 to 500 lux in an office, 1 000 to 2 000 lux on an overcast day, 10 000 to 25 000 lux in shade, and up to 100 000 lux in full sun. The reflectance of a screen is a property of its coating and its finish, and a value of 1 to 5 % is usual.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.