How much oxygen can water hold, and how much does it have? The dissolved oxygen saturation calculator gives the saturation concentration in mg/L for a given temperature, salinity and altitude, and compares it with a measured value to give the percent saturation and the deficit.
How the calculation works
- Enter the water temperature, the salinity (0 for fresh water, about 35 ppt for seawater) and the altitude of the site.
- The calculator computes the saturation concentration of oxygen: the most oxygen that the water can hold at equilibrium with the air.
- Cold water holds more oxygen. Salt lowers it, and so does altitude, because the pressure of the air falls.
- Enter the measured dissolved oxygen (from a meter or a test kit) to get the percent saturation and the deficit.
Example
A pond at 72 °F (22.2 °C), fresh water at sea level, can hold 8.63 mg/L of oxygen at saturation. A meter reads 6.5 mg/L, which is 75.3 % of saturation, a deficit of 2.13 mg/L. That is under the range most fish are comfortable in, so the pond needs aeration or less organic load.
Why it matters
Dissolved oxygen is the first number of water quality for fish ponds, aquariums, rivers and wastewater plants. Comparing a reading with the saturation tells whether the water is healthy, whether an aerator is needed and whether the oxygen has been used up by organic matter.
Good to know
The saturation formula is an empirical fit for fresh water at sea level, between 32 and 104 °F, with a salinity factor of Benson and Krause and a pressure factor for altitude in the standard atmosphere. It neglects the changes of the local weather pressure, which can change the saturation by a few percent, and the small correction for the vapor pressure of water. Meters need calibration at the same temperature and altitude. The result is an estimate, close to published tables to about 1 %.
Related tools
The Henry’s law calculator covers the solubility of gases, the aquarium CO₂ calculator covers carbon dioxide in the same water, the boiling point at altitude calculator also depends on the air pressure, and the water viscosity calculator covers the effect of temperature on water.