Skip to content
Omnikalc

Dyson sphere calculator: how warm is a shell around a star?

Enter the star's luminosity and the radius of the sphere to get the temperature of the shell, its peak infrared wavelength and its surface area.

Updated on
Your inputs
L☉

Value out of range

AU

Value out of range

Results

Temperature of the outer surface of the shell

393.6 K

Temperature in degrees Celsius
120.5 °C
Hotter than boiling water at sea level
Wavelength of peak thermal emission
7.36 µm
Surface area of the shell (in multiples of the Earth's surface area)
551,352,317

A shell that captures all the light of a star has to shed the same energy as heat. The Dyson sphere calculator takes the luminosity of the star and the radius of the shell, and gives the temperature of the shell, the wavelength of its peak glow, and its surface area relative to the Earth’s.

How the calculation works

  • Enter the luminosity of the star in solar luminosities (1 for the Sun) and the radius of the Dyson sphere in astronomical units (AU).
  • A Dyson sphere is a hypothetical shell around a star that captures all of its energy. In thermal equilibrium, the shell must radiate away all the starlight it absorbs, L = 4πR² σ T⁴.
  • Solving for the temperature gives T = (L ÷ (4π σ R²))^(1/4), where σ is the Stefan-Boltzmann constant.
  • The calculator shows the shell’s temperature, the wavelength of its peak emission from Wien’s law and its surface area compared with the Earth’s.

Example

A shell of radius 1 AU around a star like the Sun (1 L☉) settles at T = (3.828 × 10²⁶ ÷ (4π × 5.67 × 10⁻⁸ × (1.496 × 10¹¹)²))^(1/4) = 393.6 K, or 120.5 °C. It radiates mostly at 7.36 µm in the infrared, and its surface area is about 5.5 × 10⁸ times that of the Earth.

Why it matters

Astronomy fans, science fiction writers and students of thermal physics use the Dyson sphere to explore the Stefan-Boltzmann law and the ideas behind searches for advanced civilizations.

Good to know

The model assumes a perfectly absorbing shell with uniform temperature that radiates only from the outside. A real structure would have different properties, and the shell’s inside would be hotter. The result is only a first approximation.

The stellar luminosity calculator gives the star’s output, and the planet equilibrium temperature calculator uses the same balance for a planet.

Frequently asked questions

What is a Dyson sphere?

It is a hypothetical structure proposed by the physicist Freeman Dyson in 1960 that surrounds a star to capture most of its energy. A real one would probably be a swarm of orbiting collectors, not a solid shell, but the thermal physics is the same.

Why does the shell glow in the infrared?

The shell absorbs starlight and must get rid of the same power as heat. At a temperature of a few hundred kelvins, the thermal radiation peaks in the infrared. That is why searches for Dyson spheres look for unexplained infrared excess around stars.

Why is the shell hotter than the Earth?

A shell at 1 AU receives the same flux per area as the Earth, but a planet catches sunlight on its cross-section and radiates from its whole surface, which is four times larger, so it settles near 279 K. The shell catches and radiates over the same area, so it must be hotter, by a factor of √2, at about 394 K. A larger radius gives a colder shell.

Could one actually be built?

The amount of material needed is far beyond anything humans can currently produce, and a rigid shell would be unstable under gravity. The idea is mainly used as a thought experiment about the limits of energy use, as in the Kardashev scale.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.