Skip to content
Omnikalc

EIRP calculator: how much power does your antenna radiate?

Enter the transmitter power, the cable loss, the antenna gain and the legal limit to get the EIRP in dBm and watts, the ERP and the margin to the limit.

Updated on
Your inputs
dBm

Value out of range

dB

Value out of range

dBi

Value out of range

dBm

Value out of range

Results

EIRP

30.0 dBm

Within the legal limit

Margin to the legal limit

6.0 dB

EIRP in watts
1.0000 W
ERP (relative to a half-wave dipole)
27.9 dBm
Power at the antenna connector
0.0631 W

Radio rules limit not the power of the transmitter but the power the antenna sends out in its strongest direction. That is the EIRP. This EIRP calculator takes the transmitter power, the cable loss, the antenna gain and the legal limit to give the EIRP in dBm and watts, the ERP and the margin to the limit.

How the calculation works

  • EIRP (dBm) = transmitter power (dBm) − cable and connector loss (dB) + antenna gain (dBi).
  • EIRP in watts = 10^(EIRP in dBm ÷ 10) ÷ 1,000.
  • ERP = EIRP − 2.15 dB, since a half-wave dipole has a gain of 2.15 dBi.
  • Margin = legal limit − EIRP. A negative margin means the setup exceeds the limit.

Example

A radio sends 20 dBm (100 mW), the cable and connectors lose 2 dB and the antenna has a gain of 12 dBi. The EIRP is 20 − 2 + 12 = 30 dBm, which is 1.0 W. Against a limit of 36 dBm, the margin is 6.0 dB. The ERP is 27.85 dBm, and the power at the antenna connector is 0.063 W.

Why it matters

A high-gain antenna can put a transmitter over the legal limit even at low power, and a long cable can bring it back under. Installers of Wi-Fi links, amateur radio operators, drone pilots and IoT designers use EIRP to stay within the rules and to design the link budget.

Good to know

EIRP is the peak value in the direction of maximum gain, and the power in other directions is lower. The limit may apply to the EIRP, to the conducted power or to both, and may depend on the antenna type and on the channel. Some bands also require power control or listen-before-talk. Use the antenna gain from the data sheet in dBi, not dBd, which is 2.15 dB lower. Measurements of real cable loss at the working frequency are more reliable than catalog numbers.

The dBm converter changes between dBm and watts, the free-space path loss calculator estimates the loss over distance and the dipole antenna calculator gives the length of a half-wave dipole.

Frequently asked questions

What is EIRP?

Effective isotropic radiated power is the power that a perfect isotropic antenna would need to radiate to give the same signal in the strongest direction as the real antenna. It combines transmitter power, cable loss and antenna gain.

What is the difference between EIRP and ERP?

EIRP compares to an isotropic antenna and ERP to a half-wave dipole, which has 2.15 dB of gain. ERP is therefore 2.15 dB lower than EIRP for the same signal.

What are the legal limits?

They depend on the band and the country. In the US, point-to-multipoint systems in the 2.4 GHz band may reach 36 dBm EIRP, and the EU limit for Wi-Fi in that band is 20 dBm EIRP. Always check the rules that apply to you.

Why do I subtract the cable loss?

Cables and connectors absorb part of the transmitter output before it reaches the antenna. The longer the cable and the higher the frequency, the greater the loss.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.