Skip to content
Omnikalc

Electroplating calculator: how thick will the plating be?

Enter the metal, the current, the time, the surface area and the efficiency to get the mass deposited, the plating thickness, the current density and the plating rate.

Updated on
Your inputs
A

Value out of range

Value out of range

Value out of range

%

Value out of range

Results

Thickness of the plating

12.57 µm

Metal deposited
1.126 g
Thickness of the plating in mils
0.495 mil
Current density
2.00 A/dm²
Within a typical range
Plating rate
0.419 µm/min

The thickness of a plating layer depends on the current, the time, the area and the metal, and Faraday’s law makes it easy to predict. This electroplating calculator takes the metal, the plating current, the time, the surface area and the current efficiency to give the mass deposited, the thickness in micrometers and mils, the current density and the plating rate.

How the calculation works

  • Faraday’s law: the mass deposited = current × time × equivalent weight ÷ 96,485, where the equivalent weight is the atomic mass divided by the charge of the ion. Copper has an equivalent weight of 31.8 g, nickel 29.3 g and silver 107.9 g.
  • The mass is multiplied by the current efficiency, the share of the current that deposits metal instead of releasing hydrogen. Copper baths are close to 100%, nickel 90 to 97% and chromium only 10 to 20%.
  • Thickness = mass ÷ (density × area), converted to micrometers (1 mil = 25.4 µm).
  • Current density = current ÷ area in square decimeters (A/dm²). Typical values are 1 to 5 A/dm². Plating rate = thickness ÷ time.

Example

You plate copper with 2 A for 30 minutes on 15.5 in² (100 cm²) at 95% efficiency. The charge is 2 × 1,800 = 3,600 coulombs, so the mass is 3,600 × 31.77 ÷ 96,485 × 0.95 = 1.126 g. The thickness is 1.126 ÷ (8.96 × 100) × 10,000 = 12.6 µm, or 0.49 mil. The current density is 2 A/dm² and the plating rate is 0.42 µm/min.

Why it matters

Hobbyists, jewelers, restorers and small workshops plate to protect against corrosion, to improve looks or to build up worn parts. Predicting the thickness avoids a layer that is too thin to protect or so thick that it rough and flakes, and saves time and metal.

Good to know

The results are theoretical. Real thickness is not uniform, since the edges and corners of an object get more current than recesses. The efficiency depends on the bath, the temperature and the condition of the solution, so use the supplier’s data. Clean the surface well before plating, as grease stops the metal from sticking. Plating involves hazardous materials: follow safety rules and local regulations.

The Nernst equation calculator gives the voltage of an electrochemical cell, the metal weight calculator weighs metal parts and the wire resistance calculator relates wire length to resistance.

Frequently asked questions

How does electroplating work?

In electroplating, the object to plate is the cathode in a bath that contains ions of the metal. A direct current reduces the ions at the surface, which deposits a thin layer of metal. The amount of metal is proportional to the electric charge that passes, which is Faraday's law of electrolysis.

What is current density and why does it matter?

It is the current per unit of surface, usually in amperes per square decimeter. Too low a density gives slow plating, and too high a density gives rough, dull or burnt deposits and releases hydrogen. Each bath has a recommended range, often 1 to 5 A/dm², so check the data of your solution.

What is current efficiency?

It is the share of the current that really deposits metal. The rest drives side reactions such as hydrogen evolution. Acid copper and silver baths are near 100%, nickel is 92 to 97% and chromium is very low, at 10 to 20%, which is why chrome plating takes much more current and time.

Can I plate at home safely?

Plating baths contain acids, cyanides or other toxic chemicals, and the process makes fumes and hazardous waste. Copper plating from a copper sulfate bath is the most common at home. Work with good ventilation, wear gloves and eye protection, keep chemicals away from children and dispose of solutions as the local rules require.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.