Skip to content
Omnikalc

Fresnel reflectance calculator: how much light is reflected?

Enter the two refractive indices and the angle of incidence to get the reflected and transmitted light for each polarization, plus the Brewster and critical angles.

Updated on
Your inputs

Value out of range

Value out of range

°

Value out of range

Results

Reflected light (unpolarized)

5.02%

A moderate reflection
Transmitted light
94.98%
Reflectance for s polarization
9.20%
Reflectance for p polarization
0.85%
Refraction angle (0 under total internal reflection)
28.13 °
Brewster angle
56.31 °
Critical angle (0 if none)
0.00 °
Reflectance at normal incidence
4.00%

When light hits the surface of water or glass, part is reflected and part passes through. The Fresnel equations tell how much, depending on the refractive indices and the angle of incidence. This calculator gives the reflected and transmitted shares, for both polarizations, with the Brewster and critical angles.

How the calculation works

  • Snell’s law: n1 × sin θ1 = n2 × sin θ2
  • s polarization: Rs = ((n1 cos θ1 − n2 cos θ2) ÷ (n1 cos θ1 + n2 cos θ2))²
  • p polarization: Rp = ((n1 cos θ2 − n2 cos θ1) ÷ (n1 cos θ2 + n2 cos θ1))²
  • Unpolarized light: R = (Rs + Rp) ÷ 2, and T = 1 − R
  • Brewster angle = arctan(n2 ÷ n1); critical angle = arcsin(n2 ÷ n1) when n1 > n2

Example

Light goes from air (n = 1.00) to glass (n = 1.50) at 45°. It bends to 28.13° inside the glass. The reflectance is 9.20 % for s polarization and only 0.85 % for p polarization, so 5.02 % of unpolarized light is reflected and 94.98 % transmitted. The Brewster angle is 56.31°, and at normal incidence the reflectance would be 4.00 %.

Why it matters

The equations explain why lenses lose light, why anti-reflective coatings are used on glasses and camera lenses, why the surface of a lake becomes a mirror at a grazing angle and why polarizing filters remove reflections. In the other direction, from glass to air, the critical angle explains the sparkle of a diamond and the guiding of light in fibers.

Good to know

The formulas are for smooth interfaces between non-absorbing media. Metals and rough surfaces behave differently, and thin coatings create interference that the simple equations do not include. The refractive index depends a little on the color of the light. This tool is for education.

In practice

Change the angle of incidence to see how the reflection grows. For air and glass, the reflected light is 4 % at normal incidence, 5 % at 45° and as much as 61 % at 85°, which is why a window looks like a mirror when you look along its surface. Try water (n = 1.33) at normal incidence: only about 2 % is reflected.

The Malus’s law calculator handles polarizers and Brewster’s angle, the refraction calculator applies Snell’s law, and the wavelength calculator converts between frequency and wavelength.

Frequently asked questions

What are the Fresnel equations?

They give the fraction of light reflected and transmitted at the boundary between two transparent media, from their refractive indices and the angle of incidence. They depend on the polarization of the light.

Why does a window reflect 4 % of light?

At normal incidence the reflectance is ((n1 − n2) ÷ (n1 + n2))², which for air and glass (1.00 and 1.5) is 4 %. A window has two faces, so about 8 % of the light is lost in total, which is why lenses use anti-reflective coatings.

What is the critical angle?

When light goes from a dense medium to a less dense one, beyond the critical angle there is no refracted ray and all the light is reflected. For glass to air it is about 41.8°, and this effect is the basis of optical fibers.

What is the Brewster angle?

It is the angle at which the p-polarized light is not reflected at all. The reflected light is then purely s-polarized, which is why polarized sunglasses cut the glare from water and roads.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.