Skip to content
Omnikalc

Gravitational wave strain calculator: how small is the wave from two merging black holes?

Enter the masses of two black holes, the wave frequency and the distance to get the chirp mass, the strain, the time to merger and the change in the length of a detector arm.

Updated on
Your inputs
solar masses

Value out of range

solar masses

Value out of range

Hz

Value out of range

Mpc

Value out of range

Results

Gravitational wave strain h (× 10⁻²¹)

1.622

Chirp mass
28.10 M☉
Time left until the merger
11.6 ms
Change in length of a 4 km (2.5 mile) detector arm (× 10⁻¹⁸ m)
3.24
Arm length change as a share of the width of a proton
0.19 %

When two black holes spiral together and merge, they send out ripples in space itself. The gravitational wave strain calculator takes the two masses, the frequency of the wave and the distance to the source, and gives the chirp mass, the strain of the wave, the time left until the merger, the change in length of a 4 km detector arm and its size compared with a proton.

How the calculation works

  • Enter the masses of the two black holes (or neutron stars) in solar masses, the frequency of the gravitational wave at the time of interest and the distance to the source in megaparsecs (1 Mpc is 3.26 million light-years).
  • The calculator finds the chirp mass, Mc = (m₁ m₂)^(3/5) / (m₁ + m₂)^(1/5), which sets the strength and the pace of the signal.
  • It computes the strain of the wave, h = 4 (G Mc / c²)^(5/3) (π f / c)^(2/3) / d, at the given frequency, the dimensionless relative stretch of space.
  • It also gives the time left until the merger at that frequency, and the change in length that the wave would cause in the 4 km arm of a detector such as LIGO.

Example

Two black holes of 36 and 29 solar masses, like the first event detected in 2015, have a chirp mass of 28.1 solar masses. At 100 Hz and a distance of 410 Mpc (about 1.34 billion light-years), the strain is 1.62 × 10⁻²¹. The merger comes in about 11.6 ms. In a 4 km arm, the change in length is 3.2 × 10⁻¹⁸ m, only 0.19 % of the width of a proton.

Why it matters

Gravitational waves opened a new way to observe the universe, and the numbers that go with them are hard to grasp. The calculator puts them in proportion: a strain of 10⁻²¹, a change in length smaller than a proton, a signal that sweeps in milliseconds. It helps students to see how the mass, the distance and the frequency control what a detector can see.

Good to know

The formulas are the leading-order (Newtonian quadrupole) approximation for a binary of circular orbit, which is good at low frequencies and for the time before the merger. Near the merger, the real signal needs full general relativity. The amplitude given is for a source directly above the detector, and it is smaller for other directions and orientations. Redshift of the source is ignored, and it matters for distances above a few hundred Mpc.

The Schwarzschild radius calculator gives the size of a black hole, the relativistic energy calculator covers energy at high speed, the time dilation calculator covers the slowing of clocks, and the orbital period calculator covers the time of an orbit.

Frequently asked questions

What is a gravitational wave?

It is a ripple in the fabric of space and time, predicted by Einstein in 1915, that travels at the speed of light. It is made when massive objects accelerate, as when two black holes orbit each other and merge. As the wave passes, distances stretch and shrink in a pattern, by a tiny fraction called the strain. The first direct detection, by LIGO in 2015, won the Nobel Prize in 2017.

What is the chirp mass?

It is the combination of the two masses that sets how a binary system emits waves and how fast the frequency rises as the objects spiral in. The frequency and the amplitude of the signal both depend mainly on the chirp mass, so it is the first quantity measured in a detection. The name comes from the rising pitch, the chirp, that the signal has when played as a sound.

Why is the strain so small?

Space is very stiff, and even the merger of two stars produces waves that have spread over hundreds of millions of light-years by the time they reach us. A strain of 10⁻²¹ means that a length of 1 km changes by 10⁻¹⁸ m, a thousandth of the width of a proton. Detecting it needed lasers, mirrors suspended on wires, and vacuum tubes 4 km long.

What happens as the merger gets closer?

The black holes spiral in faster, and both the frequency and the amplitude rise, until they merge in a fraction of a second. For the first event, the signal rose from 35 Hz to 250 Hz in 0.2 seconds. At 100 Hz, the calculator shows that only about 12 ms remained, which is why the last cycles are so rapid.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.