Skip to content
Omnikalc

Helmholtz coil calculator

Enter the number of turns, the current, the radius and the spacing of the two coils to get the field at the center and the uniformity along the axis.

Updated on
Your inputs

Value out of range

A

Value out of range

cm

Value out of range

cm

Value out of range

cm

Value out of range

Results

Field at the center

1.798 mT

Field at the chosen offset on the axis
1.795 mT
Difference from the center field
0.18 %
Uniform within 1 %
Field with the ideal Helmholtz spacing (distance = radius)
1.798 mT
Field in gauss at the center
17.98 G

The Helmholtz coil calculator gives the magnetic field at the center and at an offset on the axis of a pair of coaxial circular coils, and it shows how uniform the field is.

How the calculation works

  • Enter the number of turns of each coil and the current.
  • Enter the radius and the distance between the coils.
  • Enter an offset along the axis to test the uniformity.
  • The calculator gives the field at the center, the field at the offset, the difference, the ideal Helmholtz field and the value in gauss.

Example

Two coils of 100 turns and 10 cm radius, 10 cm apart, carrying 2 A, give B = 0.7155 × 4π × 10⁻⁷ × 100 × 2 / 0.1 = 1.798 mT at the center. At 2 cm from the center on the axis the field is 1.795 mT, a difference of only 0.18 %.

Why it matters

The calculator helps physics students, hobbyists and lab technicians to design a coil that cancels the Earth field, calibrates a magnetometer or gives a uniform field for an experiment.

Good to know

The field grows with the number of turns and the current and falls with the radius, so a small coil with many turns is efficient. The current heats the wire in proportion to its square, so check the wire gauge and let the coil cool during long runs. To cancel the Earth field of about 0.05 mT with a coil of 10 cm radius and 100 turns, a current of about 0.06 A is needed, with the axis aligned with the field. The uniform region is about 20 % of the radius around the center, and it is larger for bigger coils. A third pair of coils at right angles gives a field in any direction.

The magnetic field calculator covers a wire, a solenoid and one coil, the solenoid inductance calculator gives the inductance of a coil, the Lorentz force calculator gives the force on a charge and the magnetic force between wires calculator gives the pull between currents.

Frequently asked questions

What is a Helmholtz coil?

A Helmholtz coil is a pair of identical circular coils on the same axis, separated by a distance equal to their radius. With the same current in the same direction, they make a field that is very uniform near the center. At the center the field is (4/5)^(3/2) μ0 N I / R, about 0.7155 μ0 N I / R.

Why is the spacing equal to the radius?

With this spacing, the first and second derivatives of the field vanish at the center, so the field varies only with the fourth power of the distance. A larger spacing makes a dip at the center and a smaller one makes a bump. The calculator lets you try other spacings and see the effect on the difference at the offset.

What does the calculator assume?

Each coil is a thin loop with all its turns at the same radius, the two currents are equal and in the same direction, and the field is computed on the axis only. A real coil has a cross section, so the field changes a little, and iron or other magnets nearby distort it. The Earth field of about 0.05 mT adds to the result.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.