Skip to content
Omnikalc

How strongly do two current-carrying wires attract or repel?

Enter the two currents, the distance between the wires and the length of the parallel run: get the force per metre, the total force and whether the wires attract or repel.

Updated on
Your inputs
A

Value out of range

A

Value out of range

Value out of range

Value out of range

Results

Force per metre of wire

4.0000 N/m

Currents in the same direction: the wires attract each other
Total force on the parallel section
12.192 N
Total force on the parallel section
2.741 lbf
Equivalent weight
1.243 kgf

Two wires carrying electric current exert a force on each other, even without touching. A current produces a magnetic field, and a wire in a magnetic field feels a force. This is the effect that once defined the ampere. This calculator gives the force per metre between two long, straight, parallel wires, the total force on the parallel section and whether the wires attract or repel.

How the calculation works

  • Force per unit length: F/L = μ₀ × I₁ × I₂ ÷ (2π × d), which is 2 × 10⁻⁷ × I₁ × I₂ ÷ d in newtons per metre
  • Total force = F/L × length of the parallel section
  • Same direction: attraction; opposite directions: repulsion
  • Distances and lengths are converted to metres internally

Example

Two busbars carry 1,000 A each in the same direction, 50 mm apart, over a parallel run of 10 ft (3.048 m). The force per metre is 2 × 10⁻⁷ × 1,000 × 1,000 ÷ 0.05 = 4 N/m. Over 3.048 m the total force is 12.19 N, about 2.74 lbf, and the busbars attract each other. In a short circuit of 50,000 A in both, the force would be 2,500 times larger, about 10,000 N/m.

Why it matters

Magnetic forces between conductors are a design constraint for switchgear, busbars, transformer windings and high-current cables. They also move coils in loudspeakers and motors. Engineers calculate the forces for the worst case, the peak short-circuit current, to choose spacers and supports that will not fail.

Good to know

The formula is exact for infinitely long wires and a good approximation when the length is much larger than the distance between them. For wires of finite thickness, use the distance between centres. The force depends on the product of the currents, so doubling one current doubles the force, and it falls off with the inverse of the distance. In AC systems, the force pulsates at twice the frequency.

The Lorentz force calculator covers a charge in a magnetic field, the solenoid inductance calculator gives the field of a coil, and the wire size calculator helps choose a conductor for a current.

Frequently asked questions

What is the force between two parallel wires?

Each current creates a magnetic field, and each wire feels a force in the field of the other. For two long parallel wires, the force per unit length is F/L = μ₀ × I₁ × I₂ ÷ (2π × d).

When do the wires attract and when do they repel?

They attract when the currents flow in the same direction and repel when they flow in opposite directions. It is the opposite of electric charges, where like charges repel.

What is the link with the ampere?

Until 2019, the ampere was defined as the current that gives a force of 2 × 10⁻⁷ newtons per metre between two parallel wires 1 metre apart in vacuum. The SI now defines it from the elementary charge, but the value is unchanged.

Why does it matter in power systems?

During a short circuit, currents of tens of kiloamperes flow in busbars a few centimetres apart. The forces become huge, hundreds or thousands of newtons per metre, and the supports must be designed to resist them.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.