Skip to content
Omnikalc

Kater pendulum calculator

Enter the periods of a reversible pendulum swung about two pivots and the distances of the pivots from its center of mass to get g and the error against the standard value.

Updated on
Your inputs
s

Value out of range

s

Value out of range

m

Value out of range

m

Value out of range

Results

Acceleration of gravity

9.8064 m/s²

Difference from the standard value 9.80665 m/s²
0.003 %
Within 0.1 %: an excellent measurement
Difference between the two periods
17.6 %
Equivalent simple pendulum length about the first pivot
0.4100 m
Radius of gyration squared about the center of mass
0.0420 m²

The Kater pendulum calculator gives the acceleration of gravity from the two periods of a reversible pendulum and the distances of its pivots from the center of mass, and compares it with the standard value.

How the calculation works

  • Enter the period about each pivot.
  • Enter the distance from each pivot to the center of mass.
  • The calculator gives g, the difference from the standard value, the period difference, the equivalent length and the radius of gyration squared.

Example

A bar with pivots at 0.2 m and 0.5 m from its center of mass swings with periods of 1.2847 s and 1.5333 s. Then (T1² + T2²) / (h1 + h2) = 5.716 and (T1² − T2²) / (h1 − h2) = 2.335, so g = 8π² / 8.052 = 9.8064 m/s², which is 0.003 % from 9.80665. The two periods differ by 17.6 %.

Why it matters

The calculator helps physics students and teachers to process the data of a reversible pendulum experiment and to see how well they measured g with simple means.

Good to know

Use a rigid metal bar with two knife edges or holes and a movable mass to change the center of mass. Measure each period over at least twenty swings with an amplitude below 5°, and repeat several times. Measure the distances from each pivot to the center of mass, found by balancing the bar on a knife edge. The result g depends on the position of the pivots only through h1 and h2, and the formula needs h1 and h2 to be different from each other, with the periods not too different. When the periods are equal, only the first term remains, and g = 4π² (h1 + h2) / T². A local value of g changes with latitude and altitude, from 9.78 m/s² at the equator to 9.83 m/s² at the poles.

The physical pendulum calculator gives the period of a bar, the pendulum calculator covers the simple swing, the gravitational force calculator gives weights and the torsion pendulum calculator covers the twisting oscillation.

Frequently asked questions

What is a Kater pendulum?

A Kater pendulum is a rigid body with two pivots on opposite sides of its center of mass, so that it can be swung about either one. When the two periods are equal, the distance between the pivots is the length of the equivalent simple pendulum and g = 4π² L / T². Captain Kater used it in 1817 to measure gravity to a high precision.

Why use two different periods?

It is hard to adjust the pivots until the periods are exactly equal. The general formula g = 8π² / [ (T1² + T2²)/(h1 + h2) + (T1² − T2²)/(h1 − h2) ] works for unequal periods and cancels the radius of gyration, which is hard to measure. The second term is small when the periods are nearly equal, so the setup is not very sensitive to the adjustment.

How accurate can the measurement be?

The result is limited by the timing of the periods and the measurement of the distances. Timing ten or twenty swings of small amplitude with a photogate gives the period to about 0.01 %, and the distances to 0.1 mm over 0.7 m give 0.015 %. The air and the amplitude correction add small errors that students can estimate.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.