Skip to content
Omnikalc

Longitudinal weight transfer calculator

Enter the weight of a vehicle, its wheelbase, center of gravity height, static front weight share and the braking or acceleration in g to get the weight transferred and the dynamic axle loads.

Updated on
Your inputs
lb

Value out of range

in

Value out of range

in

Value out of range

%

Value out of range

g

Value out of range

Results

Weight transferred between axles

519 lb

Dynamic front axle load

2,444 lb

Dynamic rear axle load

1,056 lb

Static front axle load
1,925 lb
Front share of the weight
69.8 %
Limit at which the lightest axle unloads (rear when braking, front when accelerating)
2.43 g

The longitudinal weight transfer calculator gives the weight transferred between the front and rear axles when a vehicle brakes or accelerates, the dynamic axle loads, the front share of the weight and the limit at which the lightest axle unloads, from the center of gravity height and the wheelbase.

How the calculation works

  • Enter the weight, the wheelbase, the center of gravity height and the static front share.
  • Enter the braking or acceleration in g and choose the type of event.
  • Read the transfer, the axle loads and the limit.

Example

A vehicle of 3500 lb with its center of gravity at 20 in on a wheelbase of 108 in carries 1,925 lb on the front axle at rest. At 0.8 g, it transfers 519 lb, so the front axle carries 2,444 lb and the rear 1,056 lb, a front share of 69.8 %. The lightest axle would unload at 2.43 g.

Why it matters

The calculator helps drivers, mechanics, racers, engineering students and trailer owners who want to understand why a vehicle dives under braking or squats under acceleration, to tune the brake bias, or to see how a lifted or loaded vehicle changes its handling.

Good to know

Measure the wheelbase between the centers of the front and rear wheels and estimate the center of gravity height, which is usually 18 to 24 inches for a car and 28 to 36 inches for an SUV or a pickup. The static front share comes from weighing the axles. The calculation gives the steady-state transfer and assumes a rigid vehicle on a flat road, so aerodynamic forces, body pitch and suspension travel are ignored. In a real brake test, the rear wheels also unload through the pitch of the body. Treat the result as a guide.

The center of mass calculator locates the balance point, the turning radius calculator sizes the turning circle, the tongue weight calculator sets the load on a hitch and the vehicle payload calculator adds the weight carried.

Frequently asked questions

What is longitudinal weight transfer?

When a vehicle brakes, its mass tends to continue forward, which loads the front tires and unloads the rear ones. When it accelerates, the opposite happens. The total weight does not change, only its distribution between the axles. The weight transferred equals the weight multiplied by the acceleration in g and by the height of the center of gravity, divided by the wheelbase.

Why does the height of the center of gravity matter?

The transfer is proportional to the height of the center of gravity, so a tall vehicle such as an SUV or a van transfers much more weight than a low sports car for the same braking. A longer wheelbase reduces the effect. This is why tall short-wheelbase vehicles dive more under braking and feel less stable.

How is this used for brake balance?

Under braking, the front tires carry more load and can supply more braking force, so the front brakes must do more of the work. A typical car sends 60 to 75 percent of the braking to the front. If the rear brakes work too hard compared to their load, the rear wheels lock first, which is dangerous. The dynamic loads help set the brake bias.

Is the model exact?

It is a rigid-body model of a vehicle on a flat road. It ignores aerodynamic lift or downforce, the pitch of the body, the suspension geometry and the share of the transfer taken by each part of the suspension, which affect the speed of the transfer but not its total in steady state. For track work, use measured values.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.