Skip to content
Omnikalc

Bi-elliptic transfer calculator

Enter the radius of the two circular orbits and of the intermediate apoapsis to compare the three-burn bi-elliptic transfer with the two-burn Hohmann transfer.

Updated on
Your inputs
km

Value out of range

km

Value out of range

km

Value out of range

Results

Bi-elliptic transfer delta-v (3 burns)

3.780 km/s

Hohmann transfer delta-v (2 burns)
3.980 km/s
Delta-v saved by the bi-elliptic transfer
5.03 %
Hohmann flight time
2.06 days
Bi-elliptic flight time
47.7 days
Ratio of the orbit radii (final / initial)
30.00

The bi-elliptic transfer calculator gives the delta-v of the three-burn transfer, the delta-v of the Hohmann transfer, the saving, the flight time of each and the ratio of the radii between two circular, coplanar orbits around Earth, the Moon, Mars or the Sun.

How the calculation works

  • Choose the central body.
  • Enter the radius of the initial and final circular orbits, measured from the center of the body, in kilometres.
  • Enter the apoapsis radius of the intermediate ellipse, which should be larger than the final orbit.

Example

Between orbits of 7000 km and 210000 km km, a ratio of 30.00, a Hohmann transfer costs 3.980 km/s and takes 2.06 days. A bi-elliptic transfer with an apoapsis of 1000000 km km costs 3.780 km/s, a saving of 5.03 %, but takes 47.7 days.

Why it matters

The calculator helps students of orbital mechanics, authors of space games and amateur engineers who want to see when the textbook Hohmann transfer is no longer the cheapest way to change orbit, and how much time that saving costs.

Good to know

Measure the radii from the center of the body and not from the surface: add the radius of the planet to the altitude. For a ratio under about 11.9 the Hohmann transfer always wins, and the result of the bi-elliptic transfer is then larger. Raise the intermediate apoapsis to see the saving grow toward a limit of a few percent, with a flight time that grows faster. The apoapsis must stay inside the sphere of influence of the central body, which this simple model does not check. Real maneuvers are not instantaneous, and a low-thrust engine needs a different method.

The Hohmann transfer calculator gives the classic two-burn maneuver, the rocket equation calculator converts delta-v into propellant, the orbital period calculator gives the period of an orbit and the escape velocity calculator gives the speed needed to leave a body.

Frequently asked questions

What is a bi-elliptic transfer?

It is a way to move a spacecraft between two coplanar circular orbits with three burns instead of two. The first burn raises the apoapsis far above the target orbit, the second, made at that distant point, raises the periapsis to the target radius, and the third circularizes there. The slow speed at the high apoapsis makes the second burn cheap.

When does it beat the Hohmann transfer?

When the ratio of the final to the initial radius is above about 11.94, a bi-elliptic transfer can use less delta-v, whatever the apoapsis, if it is high enough. Between a ratio of 11.94 and 15.58 it only wins when the intermediate apoapsis is beyond a limit, and above 15.58 any intermediate apoapsis larger than the final orbit already saves some delta-v.

What is the cost of the saving?

Time. The bi-elliptic transfer takes many times longer than the Hohmann transfer, often weeks or months instead of hours, and the spacecraft spends the trip far from the central body. The saving is also small, a few percent at the best, so the method is used only when propellant matters much more than time.

Is the model exact?

It treats the burns as instantaneous, the orbits as coplanar and circular, and only one central body, with no perturbations. A real mission adds gravity losses, plane changes, phasing and navigation margins. Use the result as a first estimate of the delta-v budget.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.