Skip to content
Omnikalc

Magnetic dipole moment calculator

Enter the current, the number of turns, the loop radius, the external field and the angle to get the moment, the torque and the energy.

Updated on
Your inputs
A

Value out of range

Value out of range

cm

Value out of range

mT

Value out of range

°

Value out of range

m

Value out of range

Results

Magnetic dipole moment

0.7854 A·m²

Maximum torque
0.01571 N·m
Torque at the chosen angle
0.01360 N·m
Potential energy
-0.00785 J
Field on the axis (far field)
1.257 µT

The magnetic dipole moment calculator gives the moment of a current loop or coil, the maximum torque, the torque at an angle, the potential energy and the field on the axis.

How the calculation works

  • Enter the current, the number of turns and the radius of the loop.
  • Enter the external magnetic field and the angle between the moment and the field, then the distance on the axis.
  • The calculator multiplies the current, the turns and the area for the moment, then gives the torque, the energy and the far field.

Example

A coil of 50 turns carrying 2 A, with a radius of 5 cm, has a magnetic moment of 0.7854 A·m². In a field of 20 mT it feels a maximum torque of 0.01571 N·m, and 0.01360 N·m at 60 °. Its potential energy is -0.00785 J. At 0.5 m on the axis its own field is 1.257 µT.

Why it matters

The calculator helps physics students, teachers and engineers who work on galvanometers, small motors, magnetic sensors, compass needles and electromagnets, and who need the order of magnitude of the torque on a coil in a field.

Good to know

The moment is a vector and the torque tends to align it with the field. At 90 degrees the torque is maximum and the energy is zero, at 0 degrees the loop is in its stable position. The same formulas apply to a bar magnet or to an atom, where the moment is given instead of the current and the area. The axial field formula is for a distance much larger than the radius. For a position near the coil, use the exact Biot-Savart result for a loop, which has a factor R² / (R² + z²)^(3/2). Keep the units consistent, with the radius in centimetres, the field in millitesla and the current in amperes, as the calculator does.

The magnetic field calculator gives the field of a wire or a coil, the Lorentz force calculator gives the force on a moving charge, the Faraday induction calculator gives the voltage induced by a changing flux and the solenoid inductance calculator gives the inductance of a coil.

Frequently asked questions

What is the magnetic moment of a current loop?

A loop of area A carrying a current I has a magnetic dipole moment m = I × A, in ampere-square metres. A coil of N turns has N times that moment. The vector points along the axis of the loop, in the direction given by the right-hand rule when the fingers follow the current.

How is the torque on a loop found?

In a uniform field B, the torque is τ = m × B × sin θ, where θ is the angle between the moment and the field. It is maximum when the loop is perpendicular to the field and zero when the moment is aligned or opposed. This torque turns the coil of a galvanometer and the rotor of a motor.

What is the potential energy of a dipole in a field?

The energy is U = −m × B × cos θ. It is lowest, −m × B, when the moment points along the field, and highest, +m × B, when it points against it. The difference between the two states is 2 × m × B, the work needed to flip the loop.

How good is the axial field formula?

The field on the axis far from the loop, at a distance z much greater than the radius, is B = μ0 × m / (2 × π × z³). Close to the loop the exact result is larger, so the value is a lower bound there. It falls with the cube of the distance, much faster than the field of a straight wire.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.