Skip to content
Omnikalc

Mired calculator: which color correction filter do you need?

Enter the color temperature of the light and the one you want to get the mired values, the mired shift needed and the type of filter that gives it.

Updated on
Your inputs
K

Value out of range

K

Value out of range

Results

Mired shift needed

-134 mired

Strong cooling (blue) filter, like an 80A or 80B
Mired value of the light you have
312.5 mired
Mired value you want
178.6 mired
Kelvin change
2,400 K

Color temperature is not linear for the eye, so photographers and film crews use mired values to choose filters. The mired calculator takes the color temperature of your light and the color temperature you want and gives the mired value of each, the mired shift needed, the change in kelvins and the kind of filter that provides the shift.

How the calculation works

  • Mired value = 1 000 000 ÷ color temperature in kelvins. A source at 3200 K is 312.5 mired and one at 5600 K is 178.6 mired.
  • Mired shift = the mired value you want − the mired value you have. A filter has a fixed shift, whatever the color temperature it is used with.
  • A negative shift needs a cooling (blue) filter, which lowers the mired value, and a positive shift needs a warming (amber) filter.
  • Common gelatin filters: 80A −131, 80B −112, 80C −81, 80D −56, 82A −18, 81A +18, 85C +81, 85 +112 and 85B +131 mired.

Example

Tungsten lamps at 3200 K (312.5 mired) are used with a daylight-balanced film or sensor at 5600 K (178.6 mired). The shift is 178.6 − 312.5 = −134 mired, so a strong cooling filter is needed. A Wratten 80A, at −131 mired, brings 3200 K to about 5500 K, close to the target. Note that the same −134 mired shift would move 4000 K to about 8600 K, so the change in kelvins is not constant.

Why it matters

A filter sold by its mired shift works the same under any light, so the calculation tells you which one to buy or mix. It also lets you plan a shoot with mixed light, such as a daylight window with tungsten lamps, and decide whether to filter the lamps or the window.

Good to know

The filter names are those of the Kodak Wratten system, and other makers use their own numbers for similar shifts. The filter list is approximate and only meant as a guide to size. A scene lit by fluorescent or LED lighting has a green or magenta cast that mired and kelvin values do not describe, and a color meter gives a more precise reading.

The exposure value calculator helps balance the exposure that a strong filter costs, and the lumens calculator relates the output of a lamp to the light it gives.

Frequently asked questions

What is a mired?

It is a micro reciprocal degree, defined as one million divided by the color temperature in kelvins. A change of one mired has about the same visible effect at any color temperature, which makes it a better scale than kelvins for choosing filters.

Why use mired rather than kelvins?

Because a given filter shifts the color by a fixed number of mired, but by a different number of kelvins, depending on the starting point. An 80A filter changes 3200 K to about 5500 K, a change of 2300 K, while it changes 5000 K to about 14 500 K, a change of 9 500 K. Mired values add straight.

Can I stack filters?

Yes, the shifts add. An 82A (−18) and an 82B (−32) together give −50 mired. Each filter also absorbs light and may add some reflection, so the exposure may need an increase of a stop or more for a strong filter. Check the filter factor of each filter.

Does it replace white balance on a digital camera?

A digital camera can correct the white balance by software, which is often enough. A filter still helps with film, with mixed light in a studio, with a sensor that clips in one channel under strongly colored light, and when you want a fixed look on the set.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.