Skip to content
Omnikalc

Moseley law calculator: K-alpha, K-beta and L-alpha X-ray lines of an element

Enter the atomic number of a target element and choose a line to get the characteristic X-ray energy, wavelength and frequency from Moseley’s law.

Updated on
Your inputs

Value out of range

Results

Photon energy

8.000 keV

Wavelength
0.1550 nm
Wavelength in angstroms
1.550 Å
Frequency
1.934 EHz

Each chemical element emits X-rays of precise energies when its inner electrons are knocked out. Moseley’s law links the frequency of these lines to the atomic number. The Moseley law calculator gives the energy, the wavelength and the frequency of the K-alpha, K-beta and L-alpha lines of any element.

How the calculation works

  • Enter the atomic number Z of the target element, for instance 29 for copper or 74 for tungsten.
  • Choose the X-ray line: K-alpha (an electron falls from the L shell to the K shell), K-beta (from M to K) or L-alpha (from M to L).
  • The calculator uses Moseley’s law: the frequency is proportional to (Z − σ)², with the screening constant σ = 1 for the K lines and about 7.4 for L-alpha.
  • It gives the photon energy in keV, the wavelength in nm and angstroms and the frequency in exahertz (10¹⁸ Hz).

Example

For a copper target (Z = 29) and the K-alpha line, the energy is 13.6057 × 28² × 3/4 = 8.000 keV. The wavelength is 0.1550 nm (1.550 Å) and the frequency 1.934 EHz. The measured value for copper is 8.05 keV, so the law is accurate to better than 1 %. This is the line used in most laboratory X-ray diffractometers.

Why it matters

The calculator helps students to see how the X-ray lines scale with the atomic number, to choose the anode of an X-ray tube for a given experiment, and to identify an element from a measured line in X-ray fluorescence or in electron microscopy.

Good to know

Moseley’s law is an approximation with a constant screening. Real line energies depend on the element and on the fine structure of the levels, and the K-alpha line is in fact a close doublet. The law works well for K-alpha above Z = 20 and gives larger errors for the L lines and for light elements. The calculator ignores relativistic effects, which matter for the heaviest elements.

The Bragg law calculator turns the wavelength into a diffraction angle, the photon energy calculator converts between keV, nm and frequency, the de Broglie calculator gives the wavelength of electrons, and the Rydberg calculator gives the lines of hydrogen.

Frequently asked questions

What is Moseley’s law?

In 1913 Henry Moseley measured the X-ray lines of the elements and found that the square root of the frequency grows in a straight line with the atomic number. It means that the position of an element in the periodic table is set by the charge of its nucleus, and not by its mass. The law explained the gaps in the table and predicted missing elements such as technetium and promethium.

Why is the screening constant 1 for the K lines?

An electron that falls into the K shell sees the nucleus of charge Z, but the other electron that stays in the K shell screens one unit of charge. The effective charge is then Z − 1. For the L shell, the screening by the inner electrons and by the other electrons of the shell is stronger, and for L-alpha a value of about 7.4 gives a good fit for the heavy elements.

How accurate is the calculator?

For K-alpha the error is below 1 % across most of the table. It grows for K-beta and L-alpha, where the screening depends on the element, and for light elements with a Z under 20. For the exact line energies, such as 8.048 keV for copper K-alpha, use a table. The calculator is meant for teaching and for a quick estimate, and not to calibrate a detector.

What does the line mean for an X-ray tube?

An X-ray tube produces a smooth spectrum of braking radiation and, on top of it, the characteristic lines of the anode, for instance Cu, Mo or W. The characteristic line appears only when the tube voltage is above the energy of the K edge of the anode, for example 9 kV for copper. Use the wavelength with Bragg’s law to find the diffraction angles of a crystal.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.