Skip to content
Omnikalc

Numerical aperture calculator: what detail can your objective resolve?

Choose the immersion medium, the half-angle and the wavelength to get the numerical aperture, the resolution limit, the depth of field and the useful magnification of an objective.

Updated on
Your inputs
°

Value out of range

nm

Value out of range

Results

Numerical aperture NA

1.400

An immersion objective, or the limit of a dry lens
Resolution limit (Rayleigh, 0.61 λ ÷ NA)
240 nm
Resolution limit (Abbe, 0.5 λ ÷ NA)
196 nm
Depth of field λ n ÷ NA²
0.43 µm
Smallest useful total magnification (500 × NA)
700 ×
Largest useful total magnification (1000 × NA)
1,400 ×

The sharpness of a microscope image depends on the numerical aperture of its objective. This numerical aperture calculator finds the NA from the medium and the half-angle, and gives the resolution limit for the wavelength you choose. It also gives the depth of field and the range of useful total magnification.

How the calculation works

  • Choose the medium between the objective and the sample (air, water, glycerol or immersion oil), the half-angle of the cone of light that the lens collects and the wavelength.
  • The numerical aperture is NA = n sin θ, where n is the refractive index of the medium and θ is the half-angle.
  • The resolution limit is 0.61 λ / NA (Rayleigh) or 0.5 λ / NA (Abbe), and the depth of field is about λ n / NA².
  • The useful magnification is between 500 and 1,000 times the NA, since more only enlarges blur.

Example

An oil immersion objective (n = 1.515) collects a cone of half-angle 67.5°. The NA is 1.515 × sin 67.5° = 1.40. In green light of 550 nm, the Rayleigh limit is 240 nm and the Abbe limit is 196 nm. The depth of field is 0.43 µm, and the total magnification is useful between 700× and 1,400×.

Why it matters

The numerical aperture decides what a microscope can resolve, how bright the image is and how thin the focal slice is. It helps to choose an objective, to select the immersion medium, to match the camera pixel size to the optical resolution and to understand the limits of light microscopy.

Good to know

The resolution values are the classical diffraction limits for a bright-field image of two self-luminous points, in a well-adjusted instrument. Real resolution depends on the contrast, the condenser aperture, aberrations, the sample and the detector. The depth of field is the wave-optics term only, without the geometric term from the pixel size. Fluorescence super-resolution methods can go well below these values.

The telescope resolution calculator applies the same Rayleigh criterion to the angular resolution of a telescope, the thin lens calculator covers the image position, the refraction calculator covers Snell’s law, and the speed of sound calculator covers waves in a medium.

Frequently asked questions

What is the numerical aperture?

It is NA = n sin θ, a measure of the range of angles over which a lens accepts or emits light. It combines the refractive index of the medium with the half-angle of the cone. A larger NA collects more light, gives a brighter and sharper image and a smaller shallow depth of field. It is engraved on every microscope objective.

Why does immersion oil increase the NA?

In air, n = 1, so NA cannot exceed 1, and in practice dry objectives stay below about 0.95. Oil with a refractive index close to that of glass (1.515) removes the refraction at the glass and the sample, so rays at large angles can enter the lens, and NA reaches 1.4 or more. Water immersion (n = 1.333) is used for living cells.

What is the diffraction limit?

Because light is a wave, a point is imaged as a spot of finite size, the Airy disc. Two points closer than about 0.61 λ / NA cannot be separated. This limit is about 200 to 250 nm for visible light with the best objectives, and super-resolution techniques are needed to go below it.

What is useful magnification?

Increasing the magnification beyond about 1,000 × NA gives empty magnification: the image is larger but shows no new detail. Below 500 × NA, the eye cannot see all the details that the lens resolves. The total magnification is the objective multiplied by the eyepiece or the camera.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.