Skip to content
Omnikalc

Telescope resolution calculator: how fine a detail can your telescope show?

Enter the aperture, the focal length and the wavelength to get the Rayleigh and Dawes resolution limits, the Airy disk size and the smallest feature on the Moon.

Updated on
Your inputs
in

Value out of range

in

Value out of range

nm

Value out of range

Results

Rayleigh resolution limit

0.681 arcsec

Dawes limit (double stars)
0.571 arcsec
Focal ratio
10.0
Diameter of the Airy disk at the focus
13.4 µm
Smallest feature visible on the Moon
0.789 miles

Light waves spread when they go through an opening, and this sets a limit to the finest detail that a telescope can show, whatever its quality. The telescope resolution calculator takes the aperture, the focal length and the wavelength, and gives the Rayleigh resolution limit, the Dawes limit, the focal ratio, the diameter of the Airy disk at the focus and the smallest feature visible on the Moon.

How the calculation works

  • Enter the aperture (the diameter of the main lens or mirror), the focal length and the wavelength of the light, which is 550 nm for green light, the peak of the eye’s sensitivity.
  • The calculator finds the Rayleigh resolution limit, θ = 1.22 λ / D, the smallest angle at which two point sources can be told apart, as arcseconds.
  • It also gives the Dawes limit, an empirical rule for double stars, 116 / D (mm) arcseconds, which is a bit better than Rayleigh.
  • With the focal length, it finds the focal ratio, the size of the Airy disk at the focus, and the smallest feature on the Moon that the telescope can show.

Example

A telescope of 8 in (203.2 mm) aperture and 80 in focal length (f/10) in green light of 550 nm has a Rayleigh limit of 1.22 × 550 nm / 0.2032 m = 0.681 arcsec, and a Dawes limit of 0.571 arcsec. The Airy disk at the focus has a diameter of 13.4 µm. At the distance of the Moon, the resolution corresponds to features of 0.789 miles (1.27 km).

Why it matters

The resolution decides what a telescope can do: split a close double star, show the Cassini division in Saturn’s rings, or reveal a small crater on the Moon. The calculation helps to choose an instrument, to know what to expect, and to pick a camera whose pixels match the Airy disk of the telescope, so that no detail is lost.

Good to know

The limits are for a perfect, unobstructed telescope under ideal conditions. A central obstruction, as in a reflector or a Schmidt–Cassegrain, slightly sharpens the central disk but reduces the contrast, and imperfect optics, a poor focus and cooling of the tube make the result worse. Seeing limits large telescopes on most nights. The Moon feature is the diffraction limit at the mean distance and ignores the seeing.

The telescope magnification calculator gives the power of an eyepiece, the diffraction grating calculator covers the spreading of light by a grating, the star distance calculator uses parallax, and the sky quality calculator covers the darkness of the night sky.

Frequently asked questions

What limits the resolution of a telescope?

The wave nature of light. Even a perfect telescope does not focus a star to a point but to a small disk with rings, called the Airy pattern, whose size is proportional to the wavelength divided by the aperture. Two stars closer than about the radius of the disk blend into one. A bigger aperture gives a finer limit, which is why astronomers build bigger telescopes.

What is the difference between the Rayleigh and the Dawes limit?

The Rayleigh criterion says that two stars are resolved when the peak of one falls on the first dark ring of the other, at 1.22 λ / D. The Dawes limit, found by observers by splitting double stars with bright, equal stars, is a bit smaller: about 4.56 arcseconds divided by the aperture in inches. The two are within 20 % of each other.

Does the atmosphere matter?

For a telescope with an aperture over about 10 inches (25 cm), the turbulence of the air, called seeing, is usually the main limit, typically 1 to 3 arcseconds. Only on rare nights of excellent seeing can a large amateur telescope reach the diffraction limit. Space telescopes and adaptive optics get round the problem.

What magnification do I need to see the limit?

To make the detail at the resolution limit visible to the eye, which resolves about 1 arcminute, a magnification of 60 / limit in arcseconds is needed, and often 50 times the aperture in inches is quoted as the useful maximum. Higher magnification makes the image bigger but adds no real detail, which is the empty magnification.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.