Skip to content
Omnikalc

How fast will a car run the quarter-mile?

Enter the weight of the car and its power: get the estimated quarter-mile time, the trap speed and the power-to-weight ratio.

Updated on
Your inputs

Value out of range

Value out of range

Results

Estimated quarter-mile time

12.81 s

Quick: performance-car territory
Estimated trap speed (mph)
110.0
Estimated trap speed (km/h)
177.0
Power-to-weight ratio (W/kg)
195
Weight per horsepower (lb/hp)
8.44

How quickly will a car cover a quarter of a mile (402 meters) from a standing start? Acceleration depends mainly on the ratio of weight to power. This calculator estimates the elapsed time and the speed at the end of the strip (the “trap speed”) from the weight and engine power, and gives the power-to-weight ratio.

How the calculation works

  • Quarter-mile time (seconds) = 6.29 × (weight in lb ÷ horsepower)^(1/3)
  • Trap speed (mph) = 224 × (horsepower ÷ weight in lb)^(1/3)
  • Power-to-weight = power in watts ÷ weight in kilograms

Example

A car weighs 3,800 lb with its driver and has 450 hp. The weight per horsepower is 8.44 lb, the estimated time is 12.81 seconds and the trap speed about 110.0 mph (177 km/h). The power-to-weight ratio is 195 W/kg.

Why it matters

The quarter-mile is the classic test of straight-line performance, used for magazines, drag racing and comparing modifications. The formula shows why reducing weight and adding power have similar effects, and why doubling the power does not halve the time: the cube root makes gains harder at the top.

Good to know

The result is an estimate, not a guarantee. Traction, gearing and launch matter, and cars with all-wheel drive often beat the estimate while powerful rear-wheel-drive cars on road tires fall short. Drag strips have rules and safety requirements, and public roads are no place to try these speeds. Density altitude also matters: at high elevation or in hot weather the engine breathes thinner air and loses several percent of its power, which adds a few tenths of a second. Rolling start, wheelspin and shift time are not modeled. The estimate is best used to compare cars or modifications rather than to predict a stopwatch time. This tool is for education.

The horsepower and torque calculator converts between torque, speed and power, the acceleration calculator gives the time from 0 to 60 mph, and the stopping distance calculator covers braking.

Frequently asked questions

How is the quarter-mile time estimated?

With the rule of thumb ET = 6.29 × (weight ÷ horsepower)^(1/3), where the weight is in pounds and the power at the flywheel in horsepower. The trap speed is 224 × (horsepower ÷ weight)^(1/3) in mph.

How accurate is it?

Within about 5% for a typical car with good traction. Tires, gearing, launch technique, the track surface and air density can change the result by half a second or more.

Should I use engine or wheel horsepower?

The formula was fitted to flywheel (engine) horsepower. If you know only the wheel horsepower, divide it by about 0.85 first.

Why does the weight include the driver?

Because the car carries the driver, fuel and gear, and these affect acceleration. For racing, add the driver's weight to the car's curb weight.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.