Skip to content
Omnikalc

Time, distance and shielding calculator (ALARA)

Enter the dose rate at a reference distance, your distance, the number of half-value layers of shielding and the time spent to get the dose rate at your position, the dose received and how long you can stay before reaching a chosen limit.

Updated on
Your inputs
µSv/h

Value out of range

m

Value out of range

m

Value out of range

Value out of range

h

Value out of range

Results

Dose rate at your position

3.125 µSv/h

Dose received
9.375 µSv
Share of the chosen limit
0.94 %
A small share of the limit
Time to reach the limit at this dose rate
320.0 h
Total reduction factor from distance and shielding
16.00 ×
Reduction from distance alone
4.00 ×
Reduction from shielding alone
4.00 ×

The time, distance and shielding calculator applies the ALARA principle: it gives the dose rate at your position, the dose received, the share of a dose limit and the time to reach it.

How the calculation works

  • Enter the dose rate at a reference distance.
  • Enter your distance, the half-value layers of shielding and the time spent.
  • Choose a limit. The calculator gives the dose rate, the dose, the share of the limit and the time to the limit.

Example

A source gives 50 µSv/h at 1 m. At 2 m, the distance divides the rate by 4, and 2 half-value layers divide it by 4 again, so the rate is 50 / 16 = 3.125 µSv/h. In 3 h, the dose is 9.375 µSv, which is 0.94 % of the 1 mSv public limit. At this rate, it would take 320.0 h to reach the limit.

Why it matters

The calculator helps students and workers in nuclear medicine, radiology, industrial radiography and radiation laboratories who learn the basics of protection.

Good to know

The distance rule works for a point source in open space, for distances larger than about three times the source size. Near a large or extended source the rate falls more slowly. Scattered radiation and leakage can add to the dose behind a shield, and the half-value layer depends on the energy of the radiation, so use the value for your isotope and material. Real work uses a dosimeter and the rules of your radiation protection officer. The figures here are estimates for education and planning, not a substitute for a measurement.

The inverse square law calculator shows the distance effect, the radioactive decay calculator treats decay with time, the half-life calculator converts decay constants and the dose comparison calculator puts doses in context.

Frequently asked questions

What does ALARA mean?

As Low As Reasonably Achievable: the principle of keeping doses as low as practicable. The three practical levers are time (shorter exposure), distance (the dose rate falls with the square of the distance from a point source) and shielding (each half-value layer halves the dose rate).

What is a half-value layer?

It is the thickness of a material that reduces the dose rate by half for a given radiation energy. For example, a few millimeters of lead for gamma rays of medium energy, or several centimeters of concrete. Ten half-value layers reduce the dose rate by about 1,000.

What are the limits shown?

The public limit of 1 mSv per year and the worker limit of 20 mSv per year averaged over 5 years follow ICRP recommendations, which many countries including those of the European Union use. The US occupational limit is 50 mSv per year. Local rules may differ.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.