Skip to content
Omnikalc

Ricker and Beverton-Holt recruitment calculator

Enter the maximum recruits per spawner, the density-dependence parameter and the spawner stock to get the recruits by the Ricker and Beverton-Holt models, the peak of the Ricker curve, the Beverton-Holt asymptote and the replacement stock.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Results

Recruits, Ricker model

1,797.3

Recruits, Beverton-Holt model

2,222.2

Recruits per spawner, Ricker
2.247
Recruits per spawner, Beverton-Holt
2.778
Spawners at the Ricker peak
1,000.0
Maximum recruits, Ricker peak
1,839.4
Asymptote of Beverton-Holt
5,000.0
Replacement stock, Ricker
1,609.4
Replacement stock, Beverton-Holt
4,000.0

The Ricker and Beverton-Holt recruitment calculator gives the recruits produced by a stock of spawners under the two classical models, the recruits per spawner, the peak of the Ricker curve, the asymptote of Beverton-Holt and the replacement stock of each.

How the calculation works

  • Enter the maximum recruits per spawner a, above 1.
  • Enter the density-dependence parameter b and the spawner stock S.
  • Read the recruits of each model, the peak and the replacement points.

Example

With a = 5, b = 0.001 and 800 spawners, the Ricker model gives 1,797.3 recruits (2.247 per spawner) and the Beverton-Holt model gives 2,222.2 (2.778 per spawner). The Ricker curve peaks at 1,839.4 recruits with 1,000.0 spawners, the Beverton-Holt asymptote is 5,000.0, and the replacement stocks are 1,609.4 and 4,000.0.

Why it matters

The calculator helps fisheries scientists and students, wildlife managers and ecologists who model how the number of offspring responds to the size of the breeding stock, compare the two curves, or find the stock level at which the population just replaces itself.

Good to know

The parameters a and b must come from data for the species and area, and they are uncertain. The Ricker curve declines at high stock, which can make overfishing appear to raise recruitment, so interpret it with care. The Beverton-Holt model never falls. Recruits and spawners must be in the same units, such as thousands of fish. Environmental variation and age structure are not in these simple models, and the replacement point ignores fishing mortality. When comparing the two models on the same data, check that both reproduce the observed range of stock sizes, because they can give very different answers outside that range.

The logistic growth calculator models density-dependent growth over time, the exponential growth calculator treats unlimited growth, the Allee effect calculator treats a threshold and the competition calculator treats two species.

Frequently asked questions

What are recruitment models?

A stock-recruitment model links the number of spawners to the number of young fish or animals that survive to a given stage, called recruits. Ricker (1954) and Beverton and Holt (1957) proposed the two classical forms. Both show density dependence: the more spawners, the smaller the number of recruits per spawner.

How do the two curves differ?

The Ricker model R = a × S × e^(−bS) rises, peaks at S = 1/b and then falls, which represents overcompensation such as cannibalism or competition among juveniles. The Beverton-Holt model R = a × S / (1 + b × S) rises and levels off at a / b, and never declines, so it represents compensation without a drop.

What is the replacement point?

At the replacement point, each spawner produces exactly one recruit that becomes a spawner, so the stock stays constant in a simple model without fishing. It is ln(a) / b for Ricker and (a − 1) / b for Beverton-Holt. With a = 5 and b = 0.001, these are about 1609 and 4000 spawners.

Why does a have to be above 1?

The parameter a is the number of recruits per spawner at very low density. If it is 1 or less, the stock cannot replace itself even without competition, and the population declines to zero. Fisheries managers estimate a and b by fitting the curves to stock-recruit data, with large uncertainty.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.