Skip to content
Omnikalc

Rolling down an incline calculator

Pick a hoop, a cylinder or a sphere, enter the angle and the length of the slope to get the acceleration, the time, the speed at the bottom and the friction needed.

Updated on
Your inputs
°

Value out of range

m

Value out of range

Results

Acceleration down the slope

2.960 m/s²

Time to reach the bottom
1.424 s
Speed at the bottom
4.215 m/s
Share of the energy in rotation
28.6 %
Minimum friction coefficient to roll without slipping
0.133
Time for a frictionless sliding block
1.203 s

The rolling down an incline calculator gives the acceleration, the time, the speed at the bottom and the friction needed for a hoop, a cylinder or a sphere that rolls without slipping on a slope.

How the calculation works

  • Pick the shape of the rolling object.
  • Enter the angle and the length of the slope.
  • The calculator gives the acceleration, the time, the final speed, the share of energy in rotation, the minimum friction coefficient and the time of a sliding block.

Example

A solid sphere on a 25° slope of 3 m has β = 0.4, so its acceleration is 9.80665 × sin 25° / 1.4 = 2.960 m/s². It reaches the bottom after 1.424 s at 4.215 m/s, with 28.6 % of the energy in rotation. It needs a friction coefficient of at least 0.133, and a frictionless block would arrive in 1.203 s.

Why it matters

The calculator helps physics students and teachers to predict the winner of a rolling race, to prepare a lab with a ramp and to check the idea that the result depends on the shape only.

Good to know

To run the race in class, release a hoop, a disc, a solid ball and a hollow ball from the same height at the same time, and the order is always the ball, the disc, the hollow ball and then the hoop. Use a rough ramp, for example with a thin rubber mat, so that nothing slips, and compare the result with the minimum friction coefficient shown. If a can of soup and a can of broth are rolled down together, the liquid ones do not follow the rigid body model because the contents slip inside. The time is proportional to the square root of the length, so doubling the slope gives a time 1.41 times as long. The model also assumes that the object rolls without losing energy to deformation.

The inclined plane calculator treats a block that slides, the moment of inertia calculator gives the value of other shapes, the rotational kinematics calculator describes a spin and the kinetic energy calculator gives the energy at the bottom.

Frequently asked questions

Why does a sphere beat a hoop down a slope?

Part of the energy released by the drop goes into the rotation. The more mass sits far from the axis, the larger the moment of inertia and the share of energy kept in the spin. A hoop has all its mass at the rim, so it keeps half of the energy in rotation, and it accelerates at g sin θ / 2, the slowest of the group. A solid sphere has the smallest inertia ratio, 0.4, and wins.

Do the mass and the radius matter?

No. The acceleration is g sin θ / (1 + β), where β = I / (m r²) depends only on the shape, so a heavy sphere and a light one of any radius arrive together. This is why the race only depends on the shape of the objects and not on their size or their material.

When does the object slip instead of rolling?

Rolling needs a static friction force at the contact point. The coefficient must be at least tan θ × β / (1 + β). On a steep slope or a smooth surface the object slips, rotates less and accelerates faster. The calculator gives this minimum value, which you can compare with the friction of your surface.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.