Skip to content
Omnikalc

How fast was a car going when it left skid marks?

Enter the skid length, the road surface, the grade and the speed limit: get the minimum speed at the start of the skid in mph and km/h and the margin over the limit.

Updated on
Your inputs

Value out of range

%

Value out of range

Value out of range

Results

Minimum speed at the start of the skid (mph)

51.9

The estimated speed is above the speed limit entered
Minimum speed at the start of the skid (km/h)
83.5
Over (+) or under (−) the speed limit (km/h)
11.1
Deceleration during the skid (g)
0.75

A car locks its wheels and leaves marks on the road. How fast was it going when the skid began? Accident investigators use the length of the skid marks and the drag factor of the road, because the energy of the car at the start of the skid is all converted to heat by friction on the road. This calculator gives the minimum speed from the skid length, the road surface and the grade, and compares it with the speed limit.

How the calculation works

  • Speed (m/s) = √(2 × g × skid length × (drag factor + grade))
  • US shortcut: speed (mph) = √(30 × skid length in feet × drag factor)
  • Deceleration = (drag factor + grade) in units of g
  • Grade is expressed as a fraction: 5% is 0.05, positive uphill

Example

A car leaves 120 ft of skid marks (36.6 m) on dry asphalt with a drag factor of 0.75 on a flat road. The deceleration is 0.75 g. The speed at the start of the skid was at least 51.9 mph, or about 83.5 km/h, which is 6.9 mph (11.1 km/h) over a 45 mph limit.

Why it matters

Understanding how stopping distance grows with the square of the speed explains why small increases in speed make so much difference in a crash. The calculation is a standard classroom example of the work-energy principle, and gives drivers a feel for what a skid length means.

Good to know

This is an educational simplification. Real investigations take into account the drag factor measured on the scene, anti-lock brakes that do not leave long marks, multiple skids, the weight of the car and energy lost in impacts. It is not a basis for legal conclusions. The estimate also ignores the speed lost before the wheels locked and any drift sideways, and the drag factor of a given road changes with the tires, the temperature and the state of the surface. This tool is for education.

The stopping distance calculator gives the distance to stop from a speed, the acceleration calculator covers speed changes, and the kinetic energy calculator relates speed to energy.

Frequently asked questions

How is speed estimated from skid marks?

With the work-energy relation v = √(2 × μ × g × d), where μ is the drag factor of the road, g is gravity and d is the length of the skid. In US units, speed in mph = √(30 × d in feet × μ).

Why is it called a minimum speed?

Because the car may have lost speed before the skid started, through braking, or may have hit something afterwards. Energy absorbed in a collision is not included, so the real speed was at least this figure.

What is the drag factor?

The ratio between the braking force and the weight of the car when the wheels slide. It is about 0.7 to 0.8 on dry asphalt, 0.5 on wet asphalt, and much lower on snow or ice.

How does the grade change the result?

Going uphill helps braking, so the same skid corresponds to a lower speed; going downhill makes the braking worse, so the speed is higher. The calculator adds the grade to the drag factor.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.