Skip to content
Omnikalc

Speed of sound in seawater calculator: how fast does a sonar ping travel in the sea?

Enter the temperature, salinity and depth of the water to get the speed of sound, the echo time to a target and the wavelength of the sonar signal.

Updated on
Your inputs
°F

Value out of range

ppt

Value out of range

ft

Value out of range

ft

Value out of range

kHz

Value out of range

Results

Speed of sound in seawater

1,511.7 m/s

Speed of sound in feet per second
4,960 ft/s
Round-trip echo time
121.0 ms
Wavelength of the sonar signal
0.76 cm
Ratio to the speed of sound in air
4.41 ×

The speed of sound in the sea decides how a sonar, a fish finder or a depth sounder converts the time of an echo into a distance. The speed of sound in seawater calculator applies the Mackenzie equation to the water temperature, the salinity and the depth, and gives the speed of sound in metres and feet per second, the round-trip echo time to a target, the wavelength of the sonar signal and the ratio to the speed of sound in air.

How the calculation works

  • Enter the water temperature, the salinity and the depth. Warmer, saltier and deeper water all carry sound faster.
  • The calculator applies the Mackenzie equation (1981), a nine-term formula fitted to ocean data that is accurate to about 0.07 m/s for the usual range of the ocean.
  • Enter the distance to the bottom or to a target to get the round-trip echo time of a sonar ping.
  • Enter the sonar frequency to get the wavelength of the signal, which sets the size of the smallest object that the sonar can see.

Example

Seawater at 59 °F (15 °C), a salinity of 35 ppt and a depth of 1,000 ft (304.8 m) carries sound at 1,511.7 m/s, or 4,960 ft/s, which is 4.4 times the speed in air. A ping sent to a target 300 ft away comes back after 2 × 91.44 / 1,511.7 = 121.0 ms. At 200 kHz, the wavelength is 0.76 cm.

Why it matters

Fishermen, divers, hydrographers, naval engineers and marine biologists all need the speed of sound in the sea. An error of 1 % in the speed gives an error of 1 % in the depth that a sounder reads, which is 3 ft at 300 ft. The calculator also shows how the sound channel forms and why a warm surface layer bends sonar beams.

Good to know

The Mackenzie equation is an empirical fit to the open ocean and it is accurate to a fraction of a metre per second within its range. The calculator uses one value of temperature, salinity and depth, while the real sea has a profile that changes with depth, so for long paths the speed must be averaged over the path. For fresh water, the speed is lower, about 1,480 m/s at 20 °C.

The speed of sound calculator covers sound in air, the ocean wave speed calculator covers surface waves, the tsunami speed calculator covers long waves in the deep ocean, and the pipe resonance calculator covers standing sound waves in tubes.

Frequently asked questions

Why is sound faster in water than in air?

Water is much stiffer than air, with a bulk modulus about 20,000 times larger, and this more than makes up for its higher density. Sound goes about 4.4 times faster in seawater, at around 1,500 m/s, than in air at 343 m/s. The speed is set by the square root of the stiffness divided by the density.

How do temperature, salinity and depth change the speed?

Temperature has the largest effect: about 4 m/s more for each degree Celsius in the warm upper ocean, or about 2.2 m/s per degree Fahrenheit. Salinity adds about 1.3 m/s per ppt, and depth adds about 1.7 m/s for each 100 m because the pressure stiffens the water. The speed has a minimum at 1,000 m or so, where the sound channel is.

What is the SOFAR channel?

It is a layer in the ocean, at a depth of about 600 to 1,200 m, where the speed of sound is at a minimum. Sound that enters it is bent back toward the axis and trapped, so it can travel thousands of kilometres. Whales use it to communicate over long distances, and it is used in ocean acoustics.

What range does the equation cover?

The Mackenzie formula is valid for temperatures from about 2 to 30 °C, salinities from 25 to 40 ppt and depths to 8,000 m. Outside this range, and in the Arctic or in brackish water, the result is less accurate. The calculator limits its inputs to a useful range, and the result is for open sea water and not for fresh water.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.