Skip to content
Omnikalc

Ksp calculator: how soluble is the salt, and will it precipitate?

Enter the solubility product Ksp, the salt type and the ion concentrations to get the solubility, the pKsp and whether a precipitate forms.

Updated on
Your inputs

Value out of range

Value out of range

g/mol

Value out of range

mmol/L

Value out of range

mmol/L

Value out of range

Results

Molar solubility in pure water

13.42 µmol/L

Solubility by mass
1.923 mg/L
pKsp (−log10 of Ksp)
9.74
Ion product ÷ Ksp for the ions you entered
5.56
Above 1: the solution is supersaturated and a precipitate forms
Cation concentration at saturation
13.42 µmol/L
Anion concentration at saturation
13.42 µmol/L

The solubility product (Ksp) tells you how much of a sparingly soluble salt dissolves in water. This calculator turns a Ksp into the molar solubility and mass solubility, the ion concentrations at saturation, the pKsp, and tells you whether a precipitate forms when you mix ions at given concentrations.

How the calculation works

  • Ksp = number part × 10^(power)
  • Molar solubility s from Ksp: AB gives s = √Ksp, AB2 gives s = (Ksp ÷ 4)^(1/3), AB3 gives s = (Ksp ÷ 27)^(1/4), A2B3 gives s = (Ksp ÷ 108)^(1/5)
  • Mass solubility = s × molar mass
  • Ion product Q = [cation]^m × [anion]^n from your concentrations
  • Q ÷ Ksp above 1 means precipitation

Example

Silver chloride has Ksp = 1.8 × 10⁻¹⁰, so s = √(1.8 × 10⁻¹⁰) = 1.34 × 10⁻⁵ mol/L, or 13.4 µmol/L. With a molar mass of 143.32 g/mol that is 1.92 mg/L, and the pKsp is 9.74. If you mix 0.01 mmol/L of Ag⁺ with 0.1 mmol/L of Cl⁻, Q = 10⁻⁵ × 10⁻⁴ = 10⁻⁹, which is 5.6 times the Ksp, so silver chloride precipitates.

Why it matters

Solubility equilibria explain water hardness, scale, kidney stones, how minerals form and how analytical chemists separate ions by selective precipitation. Q compared with Ksp is the quick test that tells you whether a mixture will cloud up.

Good to know

Ksp values depend on temperature and are quoted at 25 °C. The calculation assumes ideal behavior and ignores activity coefficients, complex ion formation, and pH effects for hydroxide, carbonate or phosphate salts. For salts with a significant common ion present, use the concentration fields to test the effect. Typical textbook Ksp values are tabulated at 25 °C, so check the temperature of your problem. Remember that very small solubilities, such as those of some sulfides, can still matter in toxicology and in water treatment, where parts per billion are significant.

The molarity calculator converts amounts and volumes to concentration, the limiting reactant calculator handles stoichiometry and the dilution calculator prepares solutions of a target strength.

Frequently asked questions

What is the solubility product?

The solubility product Ksp is the equilibrium constant for a sparingly soluble salt dissolving in water. For AgCl it is [Ag⁺][Cl⁻]. The smaller the Ksp, the less the salt dissolves.

How do you get solubility from Ksp?

Write the dissolution and call the molar solubility s. For a 1:1 salt Ksp = s², for AB2 it is 4s³, for AB3 it is 27s⁴ and for A2B3 it is 108s⁵. Then solve for s.

How do I tell if a precipitate forms?

Compare the ion product Q, built from the actual concentrations in the same way as Ksp, with Ksp. If Q is greater than Ksp, the solution is supersaturated and the salt precipitates; if it is smaller, it stays dissolved.

Does a common ion change the solubility?

Yes. Adding an ion the salt already contains pushes the equilibrium back toward the solid and lowers the solubility. Use the ion concentrations field to test a mixed solution.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.