Skip to content
Omnikalc

Hansen solubility parameters calculator

Enter the Hansen parameters of a polymer and of two solvents with the blend ratio to get the distance, the relative energy difference and whether the blend is likely to dissolve it.

Updated on
Your inputs
MPa½

Value out of range

MPa½

Value out of range

MPa½

Value out of range

MPa½

Value out of range

MPa½

Value out of range

MPa½

Value out of range

MPa½

Value out of range

MPa½

Value out of range

MPa½

Value out of range

MPa½

Value out of range

%

Value out of range

Results

Hansen distance Ra of the blend

6.85 MPa½

Relative energy difference RED of the blend

0.797

Blend δD
15.59 MPa½
Blend δP
9.92 MPa½
Blend δH
10.72 MPa½
RED of solvent A alone
0.723
RED of solvent B alone
1.542
Total Hildebrand parameter of the blend
21.36 MPa½

The Hansen solubility parameters calculator gives the parameters of a solvent blend, its Hansen distance Ra to a solute, the relative energy difference (RED), the RED of each solvent alone and the total Hildebrand parameter.

How the calculation works

  • Enter the δD, δP and δH and the interaction radius R0 of the solute, such as a polymer.
  • Enter the parameters of solvents A and B.
  • Enter the volume share of solvent A in the blend, and compare the RED with 1.

Example

Solvent A alone has a RED of 0.723 and solvent B alone 1.542. A blend with 70 % percent of A has parameters of 15.59 MPa½, 9.92 MPa½ and 10.72 MPa½, a distance of 6.85 MPa½ and a RED of 0.797, so a RED under 1 suggests that the solute dissolves.

Why it matters

The calculator helps chemists and engineers who choose solvents, cleaners, coatings or plastics, and students of materials, to screen a solvent or a blend for a polymer before testing it, and to see what share of a second solvent helps.

Good to know

The defaults are approximate values of acetone, ethanol and PMMA, and the parameters of a real material must come from a reliable database or from a solubility test. R0 is found by testing a material in many solvents and fitting a sphere. Hansen parameters apply at room temperature and ignore molecular size, so very large molecules and crystalline polymers dissolve less than predicted. A RED under 1 is a hint, not a guarantee, and the final choice also depends on safety, cost, evaporation and regulation.

The solubility product calculator treats the dissolution of salts, the osmotic pressure calculator relates solutions and membranes, the molarity calculator prepares solutions and the mixing ratio calculator blends components.

Frequently asked questions

What are the Hansen solubility parameters?

Hansen split the cohesive energy of a liquid into three parts: dispersion forces (δD), polar interactions (δP) and hydrogen bonding (δH), all in MPa½. Two materials with similar parameters tend to dissolve in each other, following the rule that like dissolves like.

How is the distance Ra computed?

Ra² = 4 (δD₁ − δD₂)² + (δP₁ − δP₂)² + (δH₁ − δH₂)². The factor 4 on the dispersion term comes from the empirical shape of the solubility region, which is a sphere in the space with the dispersion axis doubled. A smaller Ra means a better match between the solute and the solvent.

What is the RED?

The relative energy difference is Ra divided by the interaction radius R0 of the solute, the radius of its solubility sphere. A RED under 1 means the solvent lies inside the sphere and is likely to dissolve the solute, a value near 1 is borderline, and a value well above 1 means a poor solvent.

How are blends handled?

The parameters of a blend of solvents are the volume-weighted averages of its components. This allows two solvents that do not dissolve a polymer alone to dissolve it together, if their average falls inside the sphere. The result is a screening tool and must be confirmed in the laboratory.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.