Skip to content
Omnikalc

Tide height calculator: how high is the tide, and when will you have enough water?

Enter the heights of low and high water and the time between them to get the tide height now, its rate of rise and the time to reach a height.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

h

Value out of range

h

Value out of range

ft

Value out of range

Results

Height of the tide now

3.13 ft

Tidal range
8.20 ft
Rate of rise now
1.76 ft/h
Time after low water to reach the height you need
3:26:19

A tide table gives only the times and heights of high and low water, but you often want to know the height in between, for example to cross a sandbar, dry out a boat or reach a slipway. The tide height calculator takes the heights of low and high water, the time between them, the time since low water and the height you need, and gives the tide height now, the tidal range, the rate of rise and the time to reach your height.

How the calculation works

  • Enter the heights of low water and high water and the time between them, from a tide table, about 6 h 12 min on average.
  • Enter the time since low water to get the height now, and the height you need, for example to cross a bar or float off a mooring.
  • The calculator uses the cosine curve of the tide: h = hlow + (range / 2) × (1 − cos(180° × t / T)).
  • It also gives the rate of rise, which is fastest in the middle of the tide, and the time after low water at which the tide reaches the height you need.

Example

Low water is 1.2 ft and high water 9.4 ft, 6.2 h apart, so the range is 8.2 ft. 2 h after low water, the tide is at 1.2 + 4.1 × (1 − cos 58.1°) = 3.13 ft, and it rises at 1.76 ft/h. To reach 6.0 ft, you must wait 3 h 26 min after low water.

Why it matters

Boaters, anglers, kayakers, photographers and walkers on tidal flats need to know when there is enough water or when it will cover the path. A quick calculation answers ‘what is the height at 3 o’clock?’ and ‘when will there be 2 metres over the bar?’ without a full tidal prediction.

Good to know

The cosine model fits regular semidiurnal tides well and fails for irregular tides, double highs or lows, and shallow estuaries where the rise and the fall have different lengths. It ignores the effect of wind, air pressure and river flow. Use the official tide tables and a safety margin for all navigation. The result is a planning aid, not a prediction for safety-critical decisions.

The moon phase calculator tells you when the spring tides occur, the wind triangle calculator finds headings and ground speed, the apparent wind calculator covers sailing, and the weir flow calculator measures discharge.

Frequently asked questions

How does the tide change between low and high water?

The tide follows a curve close to a cosine. It rises slowly after low water, fastest around the middle of the rise and slowly again near high water. The cosine curve is a good model for most places that have a regular twice-daily tide, and it is the basis of the rule of twelfths used in pilotage.

What is the rule of twelfths?

It is a rule of thumb that divides the range into twelfths: 1/12 rises in the first hour after low water, 2/12 in the second, 3/12 in the third and fourth, 2/12 in the fifth and 1/12 in the sixth. It assumes a 6-hour rise and gives results close to the cosine curve. The calculator uses the exact curve and handles any duration.

Where do I find the heights and times?

In a local tide table or a tide app, for the nearest reference station. Use the heights of the low and the high water that surround the time you want, in the same datum as the chart. For a secondary port, apply the time and height differences of the table first. The result is only as good as the table.

When is it not accurate?

Where the tide is not regular, such as in places with a long stand at high water, double high waters (Southampton), or tides that are mostly once-daily. Wind and air pressure also change the height by tens of centimetres. Never rely on an estimate alone for navigation in a narrow channel, and keep a margin of depth under the keel.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.