Skip to content
Omnikalc

Total Totals and K-index calculator

Enter the temperature and dew point at 850 and 700 hPa and the temperature at 500 hPa to get the vertical totals, cross totals, Total Totals and K-index.

Updated on
Your inputs
°C

Value out of range

°C

Value out of range

°C

Value out of range

°C

Value out of range

°C

Value out of range

Results

Total Totals index

46 °C

K-index

28 °C

Vertical totals (T850 − T500)
26 °C
Cross totals (Td850 − T500)
20 °C
Total Totals class (0 under 44, 1 from 44, 2 from 50, 3 from 55)
1
Typical thunderstorm chance from the K-index
50 %

The Total Totals and K-index calculator gives the vertical totals, the cross totals, the Total Totals index with its class, the K-index and the typical thunderstorm chance, from the temperatures and dew points at 850, 700 and 500 hPa.

How the calculation works

  • Enter the temperature and dew point at 850 hPa.
  • Enter the temperature and dew point at 700 hPa and the temperature at 500 hPa.
  • Read the indices and compare them with the usual thresholds.

Example

With 16 °C and a dew point of 10 °C at 850 hPa and -10 °C at 500 hPa, the vertical totals are 26 °C, the cross totals 20 °C and the Total Totals 46 °C, class 1. The K-index is 28 °C, a typical chance of 50 % for air-mass thunderstorms.

Why it matters

The calculator helps students of meteorology, pilots, storm spotters and hobbyists who read a sounding or a model output and want a fast check of the stability and moisture before looking at more detailed parameters.

Good to know

Use the observed or forecast values at the three standard levels, in degrees Celsius. The indices are empirical and were calibrated for North America, so the thresholds shift in other climates and seasons. A high index does not mean that storms will form: a lifting trigger is needed, and a strong cap can prevent them. Low values do not exclude a storm from strong forcing or elevated instability. Always check the actual forecast of the weather service for warnings.

The dew point calculator gives the dew point from temperature and humidity, the cloud base calculator estimates the height of clouds, the wet-bulb temperature calculator combines heat and moisture and the lightning distance calculator estimates how far a strike is.

Frequently asked questions

What are the Total Totals and the K-index?

They are simple stability indices computed from temperatures and dew points at standard pressure levels of an upper-air sounding. Both measure how fast the air cools with height and how moist the lower levels are, two ingredients of thunderstorms. They were designed by forecasters for quick use on a chart.

How is the Total Totals computed?

Total Totals is the sum of the vertical totals (T850 − T500) and the cross totals (Td850 − T500), that is TT = T850 + Td850 − 2 × T500. A large temperature difference between 850 and 500 hPa shows an unstable lapse rate, and a high dew point at 850 hPa adds moisture.

What values signal thunderstorms?

A Total Totals of 44 to 50 suggests isolated thunderstorms, 50 to 55 scattered thunderstorms with a risk of severe ones, and above 55 a severe thunderstorm risk with some tornadoes. The K-index goes from no thunderstorms under 15 to near-certain air-mass thunderstorms above 40. Thresholds vary by region and season.

How reliable are they?

They are quick guides and not forecasts. They ignore the wind shear, the capping inversion, the lifting mechanism and the depth of the moisture, and values depend on the region and the season. Forecasters use them with soundings, CAPE, shear and models to judge the risk.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.