Skip to content
Omnikalc

How much energy does your bullet carry?

Enter the bullet weight, the velocity and the diameter: get the kinetic energy in foot-pounds and joules, the momentum, the sectional density and the Taylor index.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Results

Kinetic energy

364.2 ft·lbf

Kinetic energy in joules

493.8 J

Momentum
2.816 kg·m/s
Sectional density
0.1406 lb/in²
Taylor knock-out index
7.23

The energy of a bullet is a standard way to compare cartridges, airgun pellets and arrows. It comes from the bullet’s weight and speed alone, and because speed is squared, a small gain in velocity adds a lot of energy. This calculator takes the bullet weight, the muzzle velocity and the diameter, and returns the kinetic energy in foot-pounds and joules, the momentum, the sectional density and the Taylor knock-out index.

How the calculation works

  • Kinetic energy (ft·lbf) = weight in grains × speed² (fps) ÷ 450,240
  • Joules = ft·lbf × 1.3558
  • Momentum = weight ÷ 7,000 × speed, in lb·ft/s, converted to kg·m/s
  • Sectional density = (weight in pounds) ÷ (diameter in inches)²
  • Taylor knock-out = weight in pounds × speed × diameter

Example

A 9 mm bullet of 124 grains (8 g) leaves the barrel at 1,150 ft/s (350 m/s), with a diameter of 0.355 in. Its energy is 364.2 ft·lbf, or 493.8 J. The momentum is 2.816 kg·m/s, the sectional density 0.1406 lb/in² and the Taylor knock-out index 7.23.

Why it matters

Energy is used to compare loads for hunting and target shooting, to check a hunting regulation that sets a minimum energy for a species, and to rate airguns, whose power is often limited by law. Momentum matters for recoil and for how a bullet pushes a target, while sectional density helps predict penetration. Comparing two loads side by side shows why a heavier, slower bullet can carry as much energy as a lighter, faster one.

Good to know

These are muzzle values for a bullet in free flight. Energy at the target depends on drag, so a streamlined bullet keeps more of it. Energy alone does not predict effectiveness: bullet construction, expansion and shot placement matter more. Always use the speed measured with a chronograph rather than the box value, and follow local rules on the energy limits for airguns and hunting.

For the energy of any moving object, use the kinetic energy calculator, and for an arrow, the arrow speed calculator. The momentum calculator helps compare recoil, and the projectile motion calculator gives the trajectory.

Frequently asked questions

How is the kinetic energy of a bullet calculated?

Energy is half the mass times the speed squared. With the weight in grains and the speed in feet per second, divide the product of weight and speed squared by 450,240 to get foot-pounds.

What is sectional density?

The bullet's weight in pounds divided by the square of its diameter in inches. A higher value means a long, heavy-for-its-caliber bullet that keeps its speed and penetrates deeper.

What is the Taylor knock-out index?

A rule of thumb for stopping power in big-game hunting: bullet weight in pounds times velocity in feet per second times diameter in inches. It favours heavy, wide bullets and ignores bullet design.

Is the energy the same at the target?

No. The figures are for the muzzle. The bullet loses speed and energy with distance, depending on its shape and ballistic coefficient.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.