Skip to content
Omnikalc

Dunk calculator: how high do you need to jump?

Enter your standing reach, the rim height and your current vertical jump to see the jump needed to dunk, the gap, the hang time and the takeoff speed.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Results

Vertical jump needed to dunk

31.0 in

You need a higher vertical jump to dunk
Jump still to gain (zero if you can dunk)
9.0 in
Needed jump as a share of your current jump
141%
Hang time of the needed jump
0.80 s
Takeoff speed needed
3.93 m/s

Dunking is a matter of arithmetic before it is a matter of athleticism: your hand has to get above a rim that sits 10 feet off the floor. This calculator takes your standing reach, the rim height and the clearance you need, and tells you the vertical jump required, how far you are from it and what that jump demands in hang time and takeoff speed.

How the calculation works

  • Jump needed = rim height + hand clearance above the rim − standing reach
  • Gap = jump needed − your current vertical jump (zero if you already clear it)
  • Hang time = 2 × √(2 × jump ÷ g), with g = 9.81 m/s²
  • Takeoff speed = √(2 × g × jump)

A one-handed dunk usually needs the palm to be 2 to 4 inches above the rim; a two-handed dunk of a regulation ball needs more.

Example

You reach 92 in standing, the rim is 120 in and you need 3 in of clearance. The jump needed is 120 + 3 − 92 = 31 in. With a current jump of 22 in you are 9 in short, and the jump needed is 141 % of your current one. A 31 in jump (0.79 m) means a takeoff speed of 3.93 m/s and a hang time of about 0.80 s.

Why it matters

Knowing the number turns a vague goal into a training target. Add a couple of inches to your reach by working on arm length and posture, or add to your jump by strength and plyometric work, and see how the gap closes. Because jump height grows with the square of takeoff speed, the last few inches are the hardest to win: raising the jump from 22 in to 31 in needs about 19 % more takeoff speed.

Good to know

Reach and jump are measured in the same way as in the combine: flat-footed reach, then a standing or running jump. A running approach adds several inches in practice, so a gap under 6 in with a good approach is often closable. Measure honestly, warm up, and do not test maximal jumps when tired. This tool is for education.

In practice

Test your reach and your jump on the same day, repeat each three times and keep the best. Recalculate monthly: if the gap shrinks by an inch every few weeks, the plan works. Lowering the rim on a practice hoop is a safe way to learn the movement before moving up to the full 10 feet.

The vertical jump calculator estimates the jump from flight time, the projectile calculator models any throw or jump, and the true shooting calculator measures scoring efficiency in basketball.

Frequently asked questions

How high do I need to jump to dunk?

Take the rim height (120 in or 10 ft), add the 2 to 4 inches your hand must clear above the rim, and subtract your standing reach. A player who reaches 92 in needs a vertical jump of about 31 in to dunk.

What is standing reach?

It is how high you can touch with your hand while standing flat-footed with the arm fully extended. It is usually about 1.33 times your height, but it varies with arm length, so measure it against a wall.

How is a vertical jump measured?

Stand beside a wall and mark your standing reach, then jump and touch as high as you can. The difference is your vertical jump. A running two-foot jump usually beats a standing one.

How can I improve my vertical jump?

Strength training for the legs (squats, deadlifts), plyometrics such as box jumps and depth jumps, and technique work on the arm swing and the approach all help. Gains of a few inches over months are realistic; rest and avoid overloading the knees.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.