A boat floats upright because its weight pulls down through the centre of gravity (G) while the water pushes up through the centre of buoyancy (B). When the boat heels, B moves sideways, and the point where the line of buoyancy crosses the centreline is the metacentre (M). The distance from G to M, the metacentric height GM, measures the initial stability. This calculator estimates it for a box-shaped hull and gives the rolling period.
How the calculation works
- Centre of buoyancy KB = draft ÷ 2
- Metacentric radius BM = beam² ÷ (12 × draft)
- Metacentre KM = KB + BM
- Metacentric height GM = KM − KG
- Righting arm GZ = GM × sin(heel angle), and rolling period ≈ 0.8 × beam ÷ √GM
Example
A pontoon boat is 3 m wide, floats at a draft of 0.5 m, and has its centre of gravity 0.9 m above the keel. KB is 0.25 m and BM is 1.5 m, so KM is 1.75 m and the metacentric height is 0.85 m. The rolling period is about 2.6 s, and at a heel of 10° the righting arm is 0.148 m. The boat has a good initial stability for a small craft.
Why it matters
Naval architects check GM for every design and loading condition. A dinghy, a houseboat or a pontoon with a high load, such as a crowd standing on the upper deck, has a higher centre of gravity and a smaller GM. If KG rises above KM, the metacentric height becomes negative and the boat capsizes. Passenger boats are tested by inclining experiments.
Good to know
The formula is valid for small heel angles, up to about 10 degrees. At large angles, the shape of the hull decides, and the full stability curve is needed. Liquid sloshing in tanks, wet decks, hanging loads and wind pressure all reduce stability. A simple calculation is no substitute for the stability booklet of a commercial vessel, and for a small boat the rule of thumb is to keep weight low and passengers seated.
Related tools
For the water a boat displaces, use the buoyancy calculator. The hull speed calculator gives the displacement speed limit, and the anchor rode calculator sizes the line.