Skip to content
Omnikalc

MOA calculator: group size, clicks and distance

Enter the distance, the group size and the point of aim offset to get the group in MOA and mrad and the scope clicks needed to center it.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Results

Group size in MOA

1.43

Under 2 MOA: good for hunting and general shooting
Group size in milliradians
0.42 mrad
One MOA at this distance
1.047 in
Correction needed to center the group
2.86 MOA
Clicks to center the group
11.5
Same group size at the comparison distance
4.50 in

The minute of angle (MOA) is the unit most rifle shooters use for accuracy and scope adjustments. This calculator turns a group size into MOA and milliradians, shows how many clicks you need to center the group, and scales the group to another distance.

How the calculation works

  • One MOA at the target = tan(1/60°) × distance, which is 1.047 inches at 100 yards
  • Group size in MOA = group size ÷ one MOA at the target
  • Correction = distance from the group center to the point of aim ÷ one MOA
  • Clicks = correction ÷ the value of one click
  • Group at another distance = group size in MOA × one MOA at that distance
  • Milliradians = MOA × 0.2909

Example

You shoot a 1.5 inch group at 100 yards. One MOA is 1.047 inches there, so the group is 1.43 MOA, or 0.42 mrad. The group center sits 3 inches from the point of aim, which is 2.86 MOA: with 1/4 MOA clicks you need about 11.5 clicks. A rifle that holds 1.43 MOA would shoot a group of about 4.5 inches at 300 yards.

Why it matters

MOA lets you compare rifles, loads and shooters at any distance, and it connects what you see on paper to what you do on the scope. A 1 MOA rifle is no more accurate at 300 yards than at 100 in angular terms, but the group in inches is three times larger, which is what decides whether you hit a target.

Good to know

True MOA is 1.047 inches per 100 yards, while shooting MOA rounds it to 1 inch. The difference is 4.7 %, which is about half an inch at 1,000 yards. Group size is a statistic: a single group of three shots tells you little, and ten shots or several groups give a more honest picture. Wind, ammunition lots and scope tracking add error beyond the rifle itself. This tool is for education.

The bullet energy calculator computes muzzle energy, the angular size calculator converts sizes and distances to angles, and the kinetic energy calculator relates mass and speed to energy.

Frequently asked questions

What is a MOA?

A minute of angle is 1/60 of a degree. At 100 yards it spans about 1.047 inches, and the size grows in proportion to the distance, so it is 2.09 inches at 200 yards and 3.14 inches at 300 yards. Shooters often round it to 1 inch per 100 yards.

What does a sub-MOA rifle mean?

A rifle that can put its shots into a group of 1 MOA or less. At 100 yards that is a group of about 1 inch. The result depends on the ammunition, the shooter, the scope and the conditions, so it is judged over several groups.

How do I convert MOA to mils?

One milliradian is 3.438 MOA, and one MOA is 0.2909 milliradians. A scope with 0.1 mil clicks moves the point of impact by 0.344 MOA per click, a little more than the 0.25 MOA of a classic MOA scope.

How many clicks do I need to move my group?

Divide the distance between the group center and the point of aim by the size of one MOA at your distance, then divide by the value of a click. Move the adjustment toward the group, which means the point of impact moves the way you turn the dial.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.