Skip to content
Omnikalc

Parachute size calculator: how big a canopy do you need for a safe landing?

Enter the weight, the target descent speed, the canopy shape and the air density to get the canopy area, the diameter and the landing energy.

Updated on
Your inputs
lb

Value out of range

ft/s

Value out of range

Results

Canopy area needed

21.92 ft²

Firm landing: check that the payload can take the impact
Flat diameter of a round canopy
5.28 ft
Kinetic energy at touchdown
19.9 ft·lbf
Equivalent drop height
3.98 ft
Mass used in the calculation
2.268 kg

Choosing the size of a parachute comes down to a balance between drag and weight. The parachute size calculator takes the weight, the target descent speed, the canopy shape and the air density, and gives the canopy area, the flat diameter of a round canopy, the kinetic energy at touchdown, the equivalent drop height and the mass used.

How the calculation works

  • Enter the weight of the payload together with the canopy and lines, in pounds.
  • Enter the descent speed you want at touchdown, in feet per second. Light model rocket payloads often aim for 12 to 20 ft/s.
  • Choose the canopy shape, which sets the drag coefficient, and the air density for your altitude.
  • At a steady descent, drag equals weight, so the canopy area is A = 2 × m × g ÷ (ρ × Cd × v²). The calculator converts to square feet and gives the diameter of a flat round canopy with that area.

Example

A rocket payload weighs 5 lb (2.27 kg) and should land at 16 ft/s (4.88 m/s). With a flat circular canopy (Cd 0.75) at sea level, A = 2 × 2.27 × 9.81 ÷ (1.225 × 0.75 × 4.88²) = 2.04 m², which is 21.9 ft². A round canopy with that area has a flat diameter of 5.28 ft. The payload lands with 19.9 ft·lbf of energy, as if dropped from 3.98 ft. At 6,600 ft of altitude, the thinner air calls for 26.7 ft² for the same speed.

Why it matters

A canopy that is too small leads to a hard landing and a broken payload, while one that is too large drifts far, tangles more easily and costs more to make. Sizing it from the numbers before cutting any cloth saves a lot of trial and error in rocketry, drone recovery, school projects and egg-drop contests.

Good to know

The result is the area of the open canopy at steady speed. It does not cover opening shock, the first seconds of the descent, wind drift or canopy collapse. Add a safety margin of 10 to 20 percent for real flights, and test with a dummy load before the real payload. Nothing here is a substitute for certified equipment for people.

The terminal velocity calculator gives the speed for a known area, the drag force calculator shows the force on the canopy, the thrust-to-weight calculator helps with the launch side of a rocket, and the kinetic energy calculator covers other impacts.

Frequently asked questions

How is the parachute area calculated?

At a steady descent, the drag force of the canopy equals the weight. Drag is 0.5 × air density × drag coefficient × area × speed squared, so the area is 2 × mass × g ÷ (density × Cd × speed squared). Doubling the descent speed cuts the needed area to a quarter.

What descent speed should I choose?

Skydivers and heavy cargo accept 15 to 25 ft/s or more. A fragile payload, such as an electronics bay or an egg drop, does better below 15 ft/s. Model rocket guides often suggest 12 to 20 ft/s. The right value depends on how much impact the payload can take.

Why does altitude matter?

Air gets thinner with altitude, so the same canopy produces less drag and the payload falls faster. At about 6,600 ft the density is 18 percent lower than at sea level, so the canopy must be about 22 percent larger for the same descent speed.

Which drag coefficient should I use?

A flat circular canopy is around 0.75 and a hemispherical canopy with a vent is closer to 1.4, which means it needs far less cloth for the same speed. Cross-shaped canopies are around 0.65. The values are typical averages, and the real figure depends on the porosity and the lines.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.