The thrust-to-weight ratio compares what the motors can push with what gravity pulls. It is the most important single number for a vehicle that has to lift off using engine power alone, from model rockets to multicopters. A ratio below 1 means it cannot rise at all; the higher it is, the faster it accelerates and the more reserve it has to climb, carry a load and fight the wind.
How the calculation works
- Total thrust = thrust of one motor × number of motors
- Weight = mass × 9.80665 m/s²
- Thrust-to-weight ratio = total thrust ÷ weight
- Net acceleration = (thrust − weight) ÷ mass
- Hover throttle = weight ÷ total thrust
Example
A quadcopter weighs 1.5 kg and has four motors that give 9 N each at full power. The total thrust is 36 N against a weight of 14.71 N, so the thrust-to-weight ratio is 2.45. At full throttle, the net acceleration is 14.2 m/s² (about 1.45 g) and the craft needs about 41% throttle to hover, which leaves a good margin.
Typical values
Multicopters aimed at photography use ratios of around 2; racing drones reach 6 to 10. Airliners operate at about 0.25 and fighter jets around 1 or a little more. Space rockets leave the pad with a ratio of 1.2 to 1.5, since too high a value would waste fuel on acceleration within the atmosphere.
Using the result
Check thrust figures at the real voltage and not just the maximum quoted by the manufacturer, and count the weight with the battery and payload. For a drone, a hover throttle between 35% and 50% is a good target, because it leaves room for control. If the hover throttle is above 60%, consider more powerful motors or a lighter build.