Skip to content
Omnikalc

Running track calculator: lap length in each lane and the stagger of a 400 m or 200 m race

Enter the length of the straights, the inner radius, the lane width and your lane to get the lap length, the start stagger of a 200 m and a 400 m race, and the area inside the track.

Updated on
Your inputs
m

Value out of range

m

Value out of range

m

Value out of range

Value out of range

Results

Stagger for a 400 m race in your lane

30.03 m

Stagger for a 200 m race in your lane
15.02 m
Length of one lap in lane 1
400.00 m
Length of one lap in your lane
430.03 m
Radius of your running line
41.58 m
Area inside the track
10,346 m²

On a running track, the athletes in the outer lanes run a longer curve, so the starts are staggered. The running track calculator gives the length of a lap in each lane, the stagger for a 400 m and a 200 m race, the radius of the running line and the area inside the track.

How the calculation works

  • Enter the length of each straight and the radius of the inner edge of lane 1. A standard 400 m track has straights of 84.39 m and a radius of 36.50 m.
  • Enter the lane width, 1.22 m on a standard track, and the lane in which the athlete runs.
  • The calculator finds the running line of each lane: 0.30 m from the inner edge in lane 1 and 0.20 m from the lane line in the other lanes, as the athletics rules say.
  • It gives the length of a lap in lane 1 and in your lane, the stagger that makes a 400 m race fair, with two curves, and a 200 m race, with one curve, and the area inside the track.

Example

A standard track has straights of 84.39 m, an inner radius of 36.50 m and lanes 1.22 m wide. The running line of lane 1 has a radius of 36.50 + 0.30 = 36.80 m, so a lap is 2 × 84.39 + 2π × 36.80 = 400.00 m. In lane 5 the radius is 36.50 + 4 × 1.22 + 0.20 = 41.58 m, and a lap is 430.03 m. For a 400 m race with two curves, the athlete in lane 5 must start 30.03 m ahead, and in a 200 m race with one curve, 15.02 m ahead. The area inside the track is 10,346 m².

Why it matters

The calculator helps coaches, athletics clubs, schools, race organizers and students to mark the starts of a race, to check the layout of a track and to understand why the lanes are staggered. It also helps to design a track with other dimensions, for example for a school field or an indoor hall.

Good to know

The calculator is for a track with two straights and two semicircles. Real tracks have a tolerance of a few centimeters, so measure the track before an official race. Use the radius of the inner edge of lane 1, and not the radius of the running line. Banked indoor tracks and tracks with clothoid curves need other formulas.

The running pace calculator turns a time and a distance into a pace, the race time predictor estimates a time at another distance, the shape area calculator covers other plane figures, and the circle calculator gives the circumference of a curve.

Frequently asked questions

How long is a lap in each lane?

A lap is two straights plus two half circles, which together make one full circle. The length is 2 × straight + 2π × r, where r is the radius of the running line. The outer lanes have a larger radius, so a lap is longer. On a standard track, the lane 1 lap is exactly 400 m, measured 30 cm from the inner edge.

What is the stagger of a race?

In a race that stays in lanes, the athletes in outer lanes would run farther in the curves, so they start ahead. The stagger is the extra distance of the curves, 2π × (r − r₁) for two curves, as in a 400 m race, and π × (r − r₁) for one curve, as in a 200 m race. It makes all athletes run the same distance.

Why is the running line measured at 0.30 m and 0.20 m?

An athlete does not run on the kerb or on the lane line. The rules of World Athletics measure the lap of lane 1 at 0.30 m from the inner edge and the laps of the other lanes at 0.20 m from the outer line of the lane. The calculator uses these values, so the numbers match the official tracks.

Do the straights change the stagger?

No. The straights are the same length in every lane, so only the curves count. That is why the stagger depends on the radius and the lane width and not on the length of the straights. A tighter curve makes the gap between lanes larger.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.